Monday, February 28, 2011

Edge Recording in CCTV System

What is Edge Recording?
Edge recording, also called local storage or on-board recording, is when a camera records video directly onto a SD or memory card in the camera instead of a separate NVR or storage device. Edge recording gives you more flexibility in recording video.
How Edge Recording Works
Saving video files on an on-board memory card is called edge recording because the file location is on the “edge” of the surveillance system network where the camera is located, instead of a “central” location like a NVR where all cameras and other devices are connected.
The SD cards surveillance cameras use can have limited space compared to large computer hard drives or NVRs, making them a great solution when you only want to record small numbers of files. Motion detection-activated recording, where your camera only records if it detects motion and can go long stretches of time between recorded events, work well with edge recording.
Edge recording is also an alternative to larger storage systems if you’re on a budget. While you will need to purchase the SD card separately from the camera, NVR systems can be more expensive and intensive than you need if you don’t save many files.
How Edge Recording Can Help You
Edge recording provides a cost-effective storage system for small systems. But it can also add flexibility to your system, and provide a backup storage method. While specific features will vary by manufacturer, edge storage can:
·         Record files to the memory card in the event that the connection to the central NVR is lost
·         Store video for cameras that cannot easily connect to a central NVR, including remote locations and mobile camera systems
·         Minimize bandwidth by not sending large video files over your network
When used as the main storage location for small video files or as part of a larger system for saving and retrieving files, edge recording is used by many industries and system installers:
·         For businesses who only save motion-activated video at night when the office is closed
·         For home owners, who only record when they are out of the house
·         For public transportation, included busses and trains, who cannot stay connected to a central NVR while traveling

Edge recording is available on cameras from all major surveillance camera brands includingAxisOptica, and Mobotix.

Sunday, February 27, 2011

Capturing Crystal Clear Images With Megapixel Technology

Megapixel surveillance is not a new concept — its applications and benefits are starkly clear. What has changed are smarter cameras, taking advantage of the added pixels and a better understanding of illumination in real life. In the first of a two-part report, A&S examines how smarter megapixel cameras are getting; the second part looks at best practices for optimal performance.

The big picture for megapixel surveillance cameras looks bright, in the wake of the recession. HD and megapixel cameras are expected to make up nearly 30 percent of network camera shipments in 2011, according to IMS Research. By 2015, it is forecast that more than 60 percent of network cameras shipped will be of megapixel resolution.

The resolution increase has a noted effect on the whole surveillance system. While a 2.1-megapixel or 1,080p HD image is six times larger than a D1 image, the additional pixels require a bigger pipe to transmit more data. The infrastructure and storage costs for megapixel are well-documented, with ROI and TCO being used as arguments in favor of bigger pictures. The fate of megapixel is linked to the future of IP networks, with HD forecast to make up most high-resolution cameras compared to megapixel, according to IMS.

Megapixel surveillance requires careful planning, but the benefits of added resolution boost the accuracy of analytics. Edge devices take advantage of faster processors, resulting in smarter use of pixels. Analytics can help reduce bandwidth, as an event will trigger video streaming, rather than constantly sending the same still images over the network. A more distributed architecture puts less strain on networks and makes life easier.

Clarity is the main driver for megapixel. “At the end of the day, you're putting in a security system to protect life and provide evidence in a court of law,” said Stephen Moody, Security Development Manager for ViS Security Solutions, an integrator in Ireland.

Cracking the Code
H.264 is the de facto standard compression for megapixel cameras, due to its efficiency in crunching large data files into smaller ones for transmission and storage. As compression evolved from M-JPEG's stills to MPEG-4 and now to H.264, a variety of profiles yield differences in performance. With 17 profiles in all, three are the most common: baseline, main and high, said Sachin Khanna, PM for CCTV, Bosch Security Systems.

By profile, the baseline is appropriate for video conferencing; the main profile is good for broadcast video; and high profile is most applicable for HD broadcast video. “H.264 requires a fair amount of processing power for encoding and decoding; this may limit the camera's frame rate and dictate the NVR platform to achieve the desired performance,” said Rich Pineau, CTO of Oncam Global.

Most H.264 profiles stem from 2-D applications, with not all profiles being capable of integration. “Even if both cameras are H.264 and the manufacturers are partners, the system could still not work,” said Patrick Lim, Director of Sales and Marketing for Ademco Far East. “The I/O and output are hard to integrate. Some engineers say it's easy to plug and play — there's no such thing.”

Security Camera Selection Guide

ON Sunday, November 8, 2009 we discuss a Guide for choosing the CCTV system, now we know how to select a Security camera.( http://arindamcctvaccesscontrol.blogspot.com/2009/11/guide-for-choosing-cctv-system.html )

Security cameras are literally the eyes of a video surveillance system. Cameras should be deployed in critical areas to capture relevant video.
The two basic principles of camera deployment are (1) use chokepoints and (2) cover assets.
Chokepoints are areas where people or vehicles must pass to enter a certain area. Examples include doorways, hallways and driveways. Placing cameras at chokepoints is a very cost-effective way to document who entered a facility.
Assets are the specific objects or areas that need security. Examples of assets include physical objects such as safes and merchandise areas as well as areas where important activity occurs such as cash registers, parking spots or lobbies. What is defined as an asset is relative to the needs and priorities of your organization.

1. Security Camera Selection

Once you determine what areas you want to cover, there are four camera characteristics to decide on:
1. Fixed vs. PTZ: A camera can be fixed to only look at one specific view or it can be movable through the use of panning, tilting and zooming (i.e., moving left and right, up and down, closer and farer away). Most cameras used in surveillance are fixed. PTZ cameras are generally used to cover wider fields of views and should generally be used only if you expect a monitor to actively use the cameras on a daily basis. A key reason fixed cameras are generally used is that they cost 5 to 8 times less than PTZs (fixed cameras average Rs.12000 to Rs. 22000 whereas PTZ cameras can be over Rs. 75,000 INR).

2. Color vs. Infrared vs. Thermal: In TV, a video can be color or black and white. In video surveillance today, the only time producing a black and white image makes sense is when lighting is very low (e.g., night time). In those conditions, infrared or thermal cameras produce black and white images. Infrared cameras require special lamps (infrared illuminators) that produce clear image in the dark (but are significantly more expensive than color cameras - often 2x to 3x more). Thermal cameras require no lighting but product only silhouettes of objects and are very expensive (Rs. 300,000 to Rs. 1000,000 on average) In day time or lighted areas, color cameras are the obvious choice as the premium for color over black and white is trivial.

3. Standard Definition vs. Megapixel: This choice is similar to that of TVs. Just like in the consumer world, historically everyone used standard definition cameras but now users are shifting into high definition cameras. While high definition TV maxes out at 3 MP, surveillance cameras can provide up to 16 MP resolutions. In 2008, megapixel cameras only represent about 4% of total cameras sold but they are expanding very rapidly.
4. IP vs. Analog: The largest trend in video surveillance today is the move from analog cameras to IP cameras. While all surveillance cameras are digitized to view and record on computers, only IP cameras digitize the video inside the camera. While most infrared and thermal cameras are still only available as analog cameras, you can only use megapixel resolution in IP cameras. Currently, 20% of cameras sold are IP and this percentage is increasingly rapidly.

Most organizations will mix and match a number of different camera types. For instance, an organization may use infrared fixed analog cameras around a perimeter with an analog PTZ overlooking the parking lot. On the inside, they may have a fixed megapixel camera covering the warehouse and a number of fixed IP cameras covering the entrance and hallways.

2. Connectivity

In professional video surveillance, cameras are almost always connected to video management systems for the purpose of recording and managing access to video. There are two main characteristics to decide on for connectivity.
IP vs. Analog: Video can be transmitted over your computer network (IP) or it can be sent as native analog video. Today, most video feeds are sent using analog but migration to IP transmission is rapidly occurring. Both IP cameras and analog cameras can be transmitted over IP. IP cameras can connect directly to an IP network (just like your PC). Analog cameras cannot directly connect to an IP network. However, you can install an encoder to transmit analog feeds over IP. The encoder has an input for an analog camera video feed and outputs a digital stream for transmission over an IP network.
Wired vs. Wireless: Video can be sent over cables or though the air, whether you are using IP or analog video. Over 90% of video is sent over cables as this is generally the cheapest and most reliable way of sending video. However, wireless is an important option for transmitting video as deploying wires can be cost-prohibitive for certain applications such as parking lots, fence lines and remote buildings.

3. Video Management System
Video management systems are the hub of video surveillance solutions, accepting video from cameras, storing the video and managing distribution of video to viewers.
There are four fundamental options in video management systems. Most organizations choose one of the four. However, it's possible that companies may have multiple types when they transition between one to another.
DVRs are purpose built computers that combine software, hardware and video storage all in one. By definition, they only accept analog camera feeds. Almost all DVRs today support remote viewing over the Internet. DVRs are very simple to install but they significantly limit your flexibility in expansion and hardware changes. DVRs are still today the most common option amongst professional buyers. However, DVRs have definitely fallen out of favor and the trend is to move to one of the three categories below.

HDVRs or hybrid DVRs are DVRs that support IP cameras. They have all the functionality of a DVR listed above plus they add support for IP and megapixel cameras. Most DVRs can be software upgraded to become HDVRs. Such upgrades are certainly a significant trend and is attractive because of the low migration cost (supports analog and IP cameras directly).
NVRs are like DVRs in all ways except for camera support. Whereas a DVR only supports analog cameras, an NVR only supports IP cameras. To support analog cameras with an NVR, an encoder must be used.

IP Video Surveillance Software is a software application, like Word or Excel. Unlike DVRs or NVRs, IP video surveillance software does not come with any hardware or storage. The user must load and set up the PC/Server for the software. This provides much greater freedom and potentially lower cost than using DVR/NVR appliances. However, it comes with significant more complexity and time to set up and optimize the system. IP video surveillance software is the hottest trend in video management systems currently and is the most frequent choice for very large camera counts (hundreds or more).

4. Storage

Surveillance video is almost always stored for later retrieval and review. The average storage duration is between 30 and 90 days. However, a small percentage of organization store video for much shorter (7 days) or for much longer (some for a few years).
The two most important drivers for determining storage duration is the cost of storage and the security threats an organization faces.
While storage is always getting cheaper, video surveillance demands huge amount of storage. For comparison, Google's email service offer about 7 GB/s of free email storage. This is considered to be an enormous amount for email. However, a single camera could consume that much storage in a day. It is fairly common for video surveillance systems to require multiple TBs of storage even with only a few dozen cameras. Because storage is such a significant cost, numerous techniques exist to optimize the use of storage.
The type of security threats also impact determining storage duration. For instance, a major threat at banks is the report of fraudulent investigations. These incidents are often not reported by affected customers until 60 or 90 days after the incident. As such, banks have great need for longer term storage. By contrast, casinos usually know about issues right away and if a problem is to arise they learn about it in the same week. Casinos then, very frequently, use much shorter storage duration (a few weeks is common).
Three fundamental types of storage may be selected:
Internal storage uses hard drives built inside of a DVR, NVR or server. Today this is still the most common form of storage. With hard drives of up to 1 TB common today, internal storage can provide total storage of 2TB to 4TB. Internal storage is the cheapest option but tends to be less reliable and scalable than the other options. Nonetheless, it is used the most frequently in video surveillance.

Directly Attached storage is when hard drives are located outside of the DVR, NVR or server. Storage appliances such as NAS or SANs are used to manage hard drives. This usually provides greater scalability, flexibility and redundancy. However, the cost per TB is usually more than internal storage. Attached storage is most often used in large camera count applications.

Storage Clusters are IP based 'pools' of storage specialized in storing video from large numbers of cameras. Multiple DVRs, NVRs or servers can stream video to these storage clusters. They provide efficient, flexible and scalable storage for very large camera counts. Storage clusters are the most important emerging trend in video surveillance storage.
http://arindamcctvaccesscontrol.blogspot.in/2013/10/analog-cctv-storage.html

5. Video Analytics
Video analytics scan incoming video feeds to (1) optimize storage or (2) to identify threatening/interesting events.
Storage optimization is the most commonly used application of video analytics. In its simplest form, video analytics examines video feeds to identify changes in motion. Based on the presence or absence of motion, the video management system can decide not to store video or store video at a lower frame rate or resolution. Because surveillance video captures long periods of inactivity (like hallways and staircases, buildings when they are closed, etc.), using motion analytics can reduce storage consumption by 60% - 80% relative to continuously recording.
Using video analytics to identify threatening/interesting events is the more 'exciting' form of video analytics. Indeed, generally when industry people talk of video analytics, this is their intended reference. Common examples of this are perimeter violation, abandoned object, people counting and license plate recognition. The goal of these types of video analytics is to pro-actively identify security incidents and to stop them in progress (e.g., perimeter violation spots a thief jumping your fence so that you can stop them in real time, license plate recognition identifies a vehicle belonging to a wanted criminal so you can apprehend him).
These video analytics have been generally viewed as a disappointment. While many observers believe that video analytics will improve, the video analytics market is currently contracting (in response to its issues and the recession).

6. Viewing Video
Surveillance video is ultimately viewed by human beings. Most surveillance video is never viewed. Of the video that is viewed, the most common use is for historical investigations. Some surveillance video is viewed live continuously, generally in retail (to spot shoplifters) and in public surveillance (to identify criminal threats. Most live video surveillance is done periodically in response to a 'called-in' threat or to check up on the status of a remote facility.
Four fundamental options exist for viewing video:
Local Viewing directly from the DVR, NVR or servers is ideal for monitoring small facilities on site. This lets the video management system double as a viewing station, saving you the cost of setting up or using a PC. This approach is most common in retailers, banks and small businesses.

Remote PC Viewing is the most common way of viewing surveillance video. In this approach, standard PCs are used to view live and recorded video. Either a proprietary application is installed on the PC or a web browser is used. Most remote PC viewing is done with an installed application as it provides the greatest functionality. However, as web applications mature, more providers are offering powerful web viewing. The advantage of watching surveillance video using a web browser is that you do not have to install nor worry about upgrading a client.

Mobile Viewing allows security operators in the field to immediately check surveillance video. As responders and roving guards are common in security, mobile viewing has great potential. Though mobile clients have been available for at least 5 years, they have never become mainstream due to implementation challenges with PDAs/phones. Renewed interest and optimism has emerged with the introduction of the Apple iPhone.

Video Wall Viewing is ideal for large security operation centers that have hundreds or thousands of cameras under their jurisdiction. Video walls provide very large screens so that a group of people can simultaneously watch. This is especially critical when dealing with emergencies. Video walls generally have abilities to switch between feeds and to automatically display feeds from locations where alarms have been triggered.

7. Integrating Video with Other Systems
Many organizations use surveillance video by itself, simply pulling up the video management systems' client application to watch applications. However, for larger organizations and those with more significant security concerns, this is an inefficient and poor manner to perform security operations. Instead, these organizations prefer an approach similar to the military's common operational picture (COP) where numerous security systems all display on a singular interface.
Three ways exist to deliver such integration with video surveillance:

Access Control as Hub: Most organizations have electronic/IP access control systems. These systems have been designed for many years to integrate with other security systems such as intrusion detection and video surveillance. This is the most way to integrate video surveillance and relatively inexpensive ($10,000 - $50,000 USD). However, access control systems are often limited in the number and depth of integration they support.

PSIM as Hub: In the last few years, manufacturers now provide specialized applications whose sole purpose are to aggregate information from security systems (like video surveillance) and provide the most relevant information and optimal response policies. These applications tend to be far more expensive (($100,000 - $1,000,000 USD) yet support a far wider range of security manufacturers and offer more sophisticated features.

Video Management System as Hub: Increasingly, video management systems are adding in support for other security systems and security management features. If you only need limited integration, your existing video management system may provide an inexpensive (yet limited) solution.

8.Video Resolutions

1.Analog Video Resolutions
Video surveillance solutions use a set of standard resolutions. National Television System Committee (NTSC) and Phase Alternating Line (PAL) are the two prevalent analog video standards. PAL is used mostly in Europe, China, and Australia and specifies 625 lines per-frame with a 50-Hz refresh rate. NTSC is used mostly in the United States, Canada, and portions of South America and specifies 525 lines per-frame with a 59.94-Hz refresh rate.
These video standards are displayed in interlaced mode, which means that only half of the lines are refreshed in each cycle. Therefore, the refresh rate of PAL translates into 25 complete frames per second and NTSC translates into 30 (29.97) frames per second..
Table of Analog Video Resolutions (in pixels)
Format
NTSC-Based (in pixels)
PAL-Based (in pixels)
QCIF
176 × 120
176 × 144
CIF
352 × 240
352 × 288
2CIF
704 x 240
704 x 288
4CIF
704 × 480
704 × 576
D1
720 × 480
720 × 576
Note that the linear dimensions of 4CIF are twice as big as CIF. As a result, the screen area for 4CIF is four times that of CIF with higher bandwidth and storage requirements. The 4CIF and D1 resolutions are almost identical and sometimes the terms are used interchangeably.


2.Digital Video Resolutions
User expectations for resolution of video surveillance feeds are increasing partially due to the introduction and adoption of high-definition television (HDTV) for broadcast television. A 4CIF resolution, which is commonly deployed in video surveillance, is a 4/10th megapixel resolution. The HDTV formats are megapixel or higher. Table lists the typical resolutions available in the industry.

Size/ Format
Pixels
QQVGA
160x120
QVGA
320x240
VGA
640x480
HDTV
1280x720
1M
1280x960
1M
1280x1024
2M
1600x1200
HDTV
1920x1080
3M
2048x1536
While image quality is influenced by the resolution configured on the camera, the quality of the lens, sharpness of focus, and lighting conditions also come into play. For example, harshly lighted areas may not offer a well-defined image, even if the resolution is very high. Bright areas may be washed out and shadows may offer little detail. Cameras that offer wide dynamic range processing, an algorithm that samples the image several times with differing exposure settings and provides more detail to the very bright and dark areas, can offer a more detailed image.
As a best practice, do not assume the camera resolution is everything in regards to image quality. For a camera to operate in a day-night environment, (the absence of light is zero lux), the night mode must be sensitive to the infrared spectrum. It is highly recommended to conduct tests or pilot installations before buying large quantities of any model of camera.