Saturday, March 16, 2024

How to Splice Security Camera Wires

How to Splice Security Camera Wires

Splicing cables or wires is the act of combining two wires together, and it’s an indispensable skill for someone who owns or manages properties that use security cameras. You might need to do this to repair wires, lengthen wires, or combine two different wires together. 

There are two main types of security camera wires: ethernet cables and RG59 cables. Even an amateur can learn how to splice either type, and the process is relatively simple once you get some practice under your belt. 

Here, we’ll show you how to splice both ethernet and RG59 cables.

Can I Splice Security Camera Wires? 

By following simple instructions and tutorials, most people can splice security camera wires themselves. You’ll need some simple tools, such as wire cutters, wire strippers, electrical tape, and heat shrink tubing. Depending on how your wires are set up, you might also be able to splice wires together using a coupler, which makes the job even easier. 

It’s also important to note that while you can splice security camera wires together, that doesn’t always mean you should. Splicing cables could decrease the quality of your security footage, so when possible, it might be a better idea to run a new continuous cable. 

How Do You Splice Security Camera Wires? 

Before you can begin splicing your security camera wires, you need to know what type of wires you’re working with. 

If you have an IP security camera system, you’re likely working with Cat5 or Cat6 ethernet cables. These cables will consist of four twisted wire pairs encased in insulation. 

If you have a CCTV security camera system, you’re likely working with RG59 cables. This is an older type of cable, but it’s still used in many buildings. These cables will consist of copper wire encased in various layers of insulation and shielding. 

The Easiest Method for Splicing Security Camera Wires

Before you begin splicing, take a look at your wires. If they already have connectors on the ends, you’re in luck. Both ethernet cables and RG59 cables might already have connectors on the ends, and in that case, it’s easy to splice the cables. 

Simply find a compatible coupler and either insert or screw the ends of the cables into the coupler. With RG59 cables, it’s a good idea to wrap the connection with electrical tape after you’re done connecting the two cables.

How to Splice Security Camera Wires 

If your cables don’t already have connectors attached, you can still splice the wires together, but it will be a bit more complicated. The process will be different depending on whether you have ethernet cables or RG59 cables.

Splicing Security Camera Wires with Ethernet Cables 

Ethernet cables consist of small, fine wires, so it’s important to be very gentle and intentional when working with these wires. Follow these steps to splice ethernet security camera cables:

  1. First, use wire strippers to remove the outer insulation, which looks like a plastic coating on each wire you need to splice. Make sure you leave enough wire exposed to work with. 
  2. Put heat shrink tubing on only one of the wires. You’ll need this later when you’re finishing up. 
  3. Expose the inner core of each of the eight inner wires by carefully stripping off the outer layer. You’ll want to expose about a half inch of wire so you have enough to work with. Repeat this on each cable you need to splice.
  4. Combine each of the eight wires individually using a butt crimp. 
  5. Tape each of the eight connections with electrical tape. This helps strengthen the connection you’ve made. 
  6. Before sealing up your cables, it’s a good idea to test the connection to make sure it works. 
  7. When you’re done combining each wire, cover all of the connections with your heat shrink tubing. Use a heat gun to activate and shrink your tubing. 

When you’re finished, you should have a working ethernet cable. 

Splicing Security Camera Wires with RG59 Cables 

You’ll follow a relatively similar process when you splice RG59 cables. The main differences are the number of layers you need to work through and the number of wires you need to splice. Follow these steps to splice RG59 security camera cables: 

1.   Use wire strippers to remove the outer insulation on each end you need to splice. This will look like a plastic coating. Make sure you leave enough wire exposed to work with. 

2.   Put heat shrink tubing on only one of the cables. You’ll need this later when you’re finishing up. 

3.   Pull back the braided mesh, which is the next layer you’ll find in an RG59 cable.

4.   Cut and strip back the shielding and additional insulation layer; these are the next two layers you’ll find before you get to the wire. When removing these last two layers, be careful not to cut too deeply so you don’t damage the core. 

5.   Add another piece of heat shrink tubing that you’ll use once you have your connection made. 

6.   Use a butt crimp to connect the core on each end. 

7.   Wrap your connection with electrical tape. 

8.   Put the heat shrink tubing over your connection. Use a heat gun to activate and shrink your tubing. 

9.   Put a larger butt crimp over the braided mesh. 

10.Pull the heat shrink tubing over this connection. Again, use a heat gun to activate and shrink your tubing. 

11.Wrap your connection in electrical tape again. 

Depending on the type of cable you’re working with, you might have additional wires to connect when you get to the core. Some cables have additional wires for sound and to power a tilt and pan camera. If you find additional wires in the middle, follow the same process to connect those wires. 

When you’re finished, you should have a single working RG59 cable.

Why Do You Need To Splice Security Camera Wires? 

It might seem like quite a hassle to splice security camera wires, and it definitely takes time and effort. However, it’s good to know what to do in case you have a break in your wires and need to repair them quickly to get your security cameras back up and running. 

You also might need to splice wires to lengthen a cable, move a camera, or add additional security cameras. A good splice job can save you from needing to buy new cables.


Friday, March 1, 2024

Cyber Scams on the Rise in India

Unmasking the Surge: Cyber Scams on the Rise in India 

Cybercrime refers to criminal activities that are carried out using computers, computer networks, or the internet as tools or target.  Thеsе illegal activities can take various forms and can encompass a wide range of actions,  from financial fraud and data theft to online harassment and cybеr espionage.

Alarming reports suggest a surge in cyberattacks in India during the first three months of 2023, with over 500 million attacks thwarted out of a billion global attempts, as per the 'State of Application Security Report'.

Almost half the complaints, 1.56 million, were registered in 2023. Since 2019, more than 66,000 FIRs have been filed across states and Union territories based on these complaints.

Cyber scams have witnessed a significant rise in India, with multiple factors contributing to this concerning trend. Let's delve into a detailed analysis of the reasons behind the increasing prevalence of cyber scams in the country:

1. Rapid Digitalization: 

India is experiencing a massive digital transformation, with a growing number of people embracing online platforms for various activities like banking, shopping, and communication. This increased digitalization has provided cybercriminals with a larger pool of potential targets and opportunities to exploit vulnerabilities in the digital ecosystem.

2. Rising Internet Penetration: 

The widespread availability of affordable smartphones and internet connectivity has led to a surge in the number of internet users in India. As the internet user base expands, so does the potential victim pool for cyber scammers.

3. Lack of Cyber Awareness: 

A significant portion of the Indian population, particularly in rural areas and older age groups, may not have adequate knowledge of cybersecurity best practices. This lack of awareness makes them more susceptible to falling prey to various cyber scams, such as phishing emails, fake websites, and lottery frauds.

4. Sophistication of Cybercriminals: 

Cybercriminals have become increasingly sophisticated in their techniques and tools, making it challenging for individuals and organizations to detect and protect against their attacks. Advanced phishing emails, malware, and social engineering tactics are some of the methods employed by cyber scammers to exploit their victims.

5. Inadequate Cybersecurity Infrastructure: 

Despite the increasing cyber threats, many organizations and individuals in India still lack robust cybersecurity infrastructure and practices. This inadequacy leaves them vulnerable to cyber attacks, data breaches, and financial losses.

6. Lack of Stringent Regulations: 

The absence of stringent cybersecurity regulations and penalties for cybercrime in India can be perceived as an opportunity by cyber scammers. The absence of severe consequences for perpetrators may embolden them to continue their illicit activities.

7. Increasing Online Transactions: 

The rise of e-commerce and digital payment platforms has led to a surge in online transactions. This digital financial ecosystem attracts cyber scammers who seek to exploit security loopholes and trick users into divulging sensitive financial information.

8, Insider Threats: 

Insider threats, where current or former employees with access to sensitive data engage in fraudulent activities, can pose significant risks to businesses and individuals alike.

9. Global Nature of Cybercrime: 

Many cyber scams originate from outside India, taking advantage of the borderless nature of the internet. These international cyber threats may pose jurisdictional challenges for law enforcement agencies and hinder effective prosecution.

Root Cause to this: -

The rapid digitalization, rising internet penetration, lack of cyber awareness, and the increasing sophistication of cybercriminals are some of the key reasons behind the rise of cyber scams in India.

To combat this growing menace, there is an urgent need for enhanced cybersecurity awareness, investment in robust security measures, and the formulation of stringent cybersecurity regulations.

Additionally, continuous education and training in cybersecurity best practices for individuals and organizations can play a vital role in thwarting cyber scammers and creating a safer digital environment for all. Do not install non-NDAA approved IP Camera, NVR etc. Do not use China Based origin brand IP camera NVR etc.

Here are other takeaways for 2023:

  • Imposter scams. Imposter scams remained the top fraud category, with reported losses of $2.7 billion. ...
  • Investment scams. While investment-related scams were the fourth most-reported fraud category, losses in this category grew. ...
  • Social media scams. ...
  • Payment methods. ...
  • Losses by age.

Cybercrime Laws In India

1.   Information Tеchnology Act, 2000 (IT Act): Thе Information Tеchnology Act,  2000,  is thе primary legislation that dеals with cybеrcrimеs in India.  It was amеndеd in 2008 to kееp up with еvolving tеchnology and cybеr thrеats.  Kеy provisions of thе IT Act includе:

2.   Sеction 43: This sеction dеals with unauthorizеd accеss to computеr systеms and data. It providеs for pеnaltiеs for unauthorizеd accеss,  downloading,  or introduction of computеr virusеs.

3.   Sеction 65: This sеction dеals with tampеring with computеr sourcе documеnts, and it imposеs pеnaltiеs for altеring,  damaging,  or dеlеting data with thе intеnt to causе damagе or harm.

4.   Sеction 66: This sеction addrеssеs computеr-rеlatеd offеnsеs, such as hacking,  and prеscribеs pеnaltiеs for unauthorizеd accеss to computеr systеms,  nеtworks,  or data.

5.   Sеction 66A (Rеpеalеd): Sеction 66A was controvеrsial and was struck down by thе Suprеmе Court of India in 2015 bеcausе it was dееmеd to bе infringing on frее spееch rights.

6.   Sеction 66B: This sеction dеals with dishonеstly rеcеiving stolеn computеr rеsourcеs or communication dеvicеs.

7.   Sеction 66C: It pеrtains to idеntity thеft and thе usе of somеonе еlsе’s idеntity for fraudulеnt purposеs.

8.   Sеction 66D: This sеction dеals with chеating by pеrsonation using a computеr rеsourcе.

9.   Sеction 67: This sеction addrеssеs thе publication or transmission of obscеnе matеrial in еlеctronic form and imposеs pеnaltiеs.

10.Sеction 69: This sеction providеs thе govеrnmеnt with thе powеr to intеrcеpt and monitor еlеctronic communications for rеasons rеlatеd to national sеcurity.

11.Sеction 70: This sеction dеals with thе protеction of critical information infrastructurе and providеs for thе appointmеnt of a National Critical Information Infrastructurе Protеction Cеntrе (NCIIPC).

12.Sеction 72: It dеals with thе brеach of confidentiality and privacy and imposеs pеnaltiеs for disclosing pеrsonal information without consеnt.

13.Information Tеchnology (Amеndmеnt) Act, 2008: This amеndmеnt act еxpandеd thе scopе of thе IT Act and introducеd provisions rеlatеd to data protеction,  data brеachеs,  and increased pеnaltiеs for cybеrcrimеs.

Tracking WhatsApp messages or any other form of electronic communication without proper legal authorization is typically illegal and a violation of privacy.  However, undеr certain circumstances and with appropriate legal processes,  law enforcement agencies and cybеr cеlls may bе able to access WhatsApp messages as part of a criminal investigation. WhatsApp usеs еnd-to-end encryption, which means that messages arе scramblеd and can only bе decrypted by thе intended recipient.  WhatsApp itself does not have accеss to thе content of messages. To access WhatsApp messages for investigative purposes’, law enforcement agencies typically nееd to obtain proper lеgal authorization,  such as a court-issued warrant or a lawful court order.

Government of India has banned 17 Chinese companies from participating in tenders in India and warned private companies that do business with government entities against using these Chinese products. This is being seen as a significant crackdown on Chinese products that were entering the country after changing their brand names and tying up with Indian entities, ostensibly to hide their place of origin, and thus impacting the strategic and security interests of India while benefiting the Chinese economy.

The companies that have been banned include Xp-pen, Highvision Hikvision, Lenovo, Dahua, Lava, Ottomate, Xolo, Airpro, Grandstream, Wi-Tek, Realtime, Maxhub, Nokia, Domino, Reputer and Tyco.

The Sunday Guardian, last year, had revealed about Chinese products being used in government public sector undertakings that are working in the strategic sectors (Indian PSUs continue reliance on Chinese equipment in strategic sectors, 26 February 2023).

As per the government order released on the last day of January, the Indian sellers of these Chinese brands and the catalogs uploaded by them have been removed from Government e Marketplace (GeM) and they are not eligible for participating in any bid on GeM. The order has also said GeM will cancel those orders where the products of these Chinese companies are found to be used for the bid.

Seventy products, the maximum on the list, that have been banned belong to Hangzhou Hikvision Digital Technology Co., Ltd., often shortened to Hikvision. Its Indian face is Prama Hikvision (India) Pvt. Ltd. It is one of the biggest suppliers to Indian government agencies.

Similarly, DNS overseas, which handles products brought from the Beijing-based Hanvon Ugee Group and is a big player in the tablet market in India, has been removed from the GeM portal.

Twenty two products made by Lenovo, including servers, have been banned. Not many are aware that Lenovo is of Chinese origin.

Lenovo, founded in 1984, is seen as a product of the Chinese Academy of Sciences (CAS)—the Chinese-government’s premier institution of scientific research. CAS is reported to have extensive ties to the Chinese military.

Five products of Zhejiang Dahua Technology Company Limited, a publicly traded company based in Binjiang District, Hangzhou, which manufactures video surveillance equipment and sells its products in India under the brand name “Dahua” also features on the banned list.

Nineteen products of Lava International, whose brand ambassador is actor Kartik Aaryan, and has used cricketer Mahendra Singh Dhoni in the past, too have been banned. Also put on the banned list are products made under the brand name “Ottomate”, which is also a part of the Lava group. The products that have been banned include smart phones, fans and tablets. While Lava is seen as an Indian company, its products are made in China and then sold in India under a new brand name.

Thirteen products of Airpro have been put on the banned list including routers and cameras.

Five products of Grandstream and W-Tek that are sold in India by Cohesive Technologies have been removed from the portal.

Thirty one products made by “Realtime” and sold by Realtime Biometrics India Private Limited companies that include boom barriers, biometric access system, CCTVs have been banned.

The government has also come down heavily on the Chinese entity, Maxhub that sells its products through Shiyuan India Private Limited. A total of 18 of its products have been banned.

Six products sold by Hmd Mobile India Private Limited that are made by Nokia have been banned. According to industry insiders, the banned products are being manufactured in China. The brand had launched a media blitzkrieg a few years ago to convince Indian nationals that it was not making its products in China.

Seven products made by Tyco and marketed in India by Tyco Safety Products (India) Private Limited, two of Domino sold in India by Domino Printech India Llp and one of Reputer sold domestically by Innovitiq have been banned.

However, what has piqued industry insiders and security watchers is that many entities with notable Chinese investments and control that are active in India have not been added to this list.

These include products made by Huawei, Alcatel Lucent—a French company now owned by Chinese promoters, TvT, Tiandy Technologies and Uniview. All these companies have a significant presence in India and have been dealing with government agencies for a long time now.

On 6 August 2020, a Registration Committee under Department of Expenditure Order was constituted under the chairpersonship of Manmeet Kaur Nanda, a 2000 cadre IAS officer, who was then Joint Secretary, Department for Promotion of Industry and Internal Trade, to consider applications received for registration of bidders from countries that share land border with India for participation in public procurement.

It is this committee that keeps an eye on the products from the identified countries and evaluates the risk, if any, that is poised by them. In November 2023, Nanda moved as Joint Secretary to the Cabinet Secretariat. Sources in Government of India said that this is not an exhaustive list and more companies will be added on the list as per inputs that the concerned officials will receive.

Thursday, February 15, 2024

METHOD STATEMENT FOR PVC CONDUITS INSTALLATION

 METHOD STATEMENT FOR PVC  CONDUITS  INSTALLATION

Ø TABLE OF CONTENTS

1. SCOPE

2. definitions

3. HEALTH  AND  SAFETY

4. OPERATION

5. installation  and  fixation

6. RESPONSIBILITIES

7. MANPOWER  REQUIRED

8. MATERIALS  REQUIREMENTS

9. EQUIPMENTs  REQUIREMENTs

10. WASTE MANAGEMENT

11. SPECIAL CONTROL MEASURES.

12. SUPPORTING  DOCUMENTATION

13. DISTRIBUTION

1.SCOPE

Ø  This procedure to clear the method of the supply, installations of Electrical PVC Conduits for the project.

Ø  This document details Electrical PVC Conduits Installation:

1.  Preparation of work.

2.  Delivery and inspection upon arrival of material at site.

3.  Installation of the system.

2. definitions

           PQP             : Project Quality Plan

PSP              : Project Safety Plan

QCP             : Quality Control Procedure

HSE             : Health, Safety and Environment

MS               : Method Statement

ITP               : Inspection Test Plan

QA/QC         : Quality Assurance / Quality Control Engineer.

WIR              : Inspection and Test Request

MIR              : Material Verification Record.

3. HEALTH  AND  SAFETY

Ø  Strictly followed as per the manufacturer's Health and Safety recommendations for handling and use of the materials.

Ø  Ensure all involved personnel shall be aware of the same.

Ø  Specific safety measures have to follow as applicable, and all the safety measures are covered separately in the project safety plan.

4. OPERATION

Ø  Material: 

·       Material used will be as approved by the Engineer.

·       The sizes and routes routing will be as per the approved Shop Drawings.

Ø  Storage and Protection: 

·       Deliver components parts to site, completely identified in accordance with shop and certified CAD Drawings prepared for this work.

·       Store in accordance with the manufacturer’s instructions, above ground, properly protected from the weather and construction activities.

5. INSTALLATION  and  fixation

Ø  Pre-Installation:

·       All materials and documentation relevant to this particular section of works will be checked and verified ensuring that  these are correct and approved type.

 

·       Prior to the commencement of works, ensure that the areas for permanent installation are ready, accessible and in suitable condition.

Ø  Installation:

·       During the course of the installation of the conduit system, procedures for working and dressing the installation as recommended shall be employed.

·       All bends and sets shall be in accordance with IEE regulation 522-08 formed with the aid of a helical spring fitted internally, with if necessary, the conduit warmed sufficiently for it to move without avoidable wall thinning of the out side of the bend.

·       Conduit system shall be installed so as to ensure compliance with the requirements of Specified Standard and Regulation.

·       Joints between PVC conduit + fittings shall be made with suitable adhesive, but expansion couplings shall be installed where any length of conduit , inclusive of draw in boxes etc, exceeds five meters in length.

·       The minimum and maximum sizes of conduit to be employed shall be 20mm and 32mm diameter respectively, unless otherwise stated in subsequent sections of the Specification .

·       Conduits in floors shall be routed and installed so as to avoid the fixings of floor standing equipment to be installed on the floor.

 

Ø  Commissioning:

·       When conduits are run on shuttering, prior to the laying of concrete insitu, additional security must be provided near to every box and at intervals of not more than 1.2 meters by binding short lengths of steel wire, of not less than 2mm diameter twisted around the conduit and reinforcing steel. The conduits shall be adequately fixed to prevent excessive movement and damage during the pouring and setting of concrete and shall be protected from mechanical damage. Check there is no damage before screed / concrete is poured. Unless otherwise indicated to cast in conduits shall not be less than 30mm.cores to plastered over conduits shall not be less than 5mm.

·       Where conduits are left "open ended" prior to wiring they shall be protected by caps or plugs to prevent the ingress of building material.

·       All conduits runs must be designed to permit wiring to be readily installed after the complete erection of the conduits through the available draw-in, accessory and luminary suspension boxes.

·       Where surface mounted equipment (other than luminaries) is specified, all concealed conduits shall be terminated and an adaptable box installed recessed into the wall at every surface mounted equipment position.

·       Where conduits pass through an external wall/roof the conduit box shall be fitted on the side and after wiring filled with an inert, permanently plastic compound having a high insulation value.

·       Make provision in conduit and trunking, installation where building expansion joints are crossed or settlement is likely

·       Ensure conduits are not concealed until works has been inspected and approved. Ensure that conduit and fittings buried in concrete or behind plaster are protected against corrosion or electrolytic action prior to rendering.

Ø  Technical Assistance:

·       The installation supervising technician for the system trade shall instruct the CONSULTANT Engineer, and Construction Site Manager on the programming and correct operation of the system after the installation is completed.

·       This instruction shall be scheduled at the convenience of the staff.

·       All such instruction shall be properly recorded.

·       WIR will be issued for Consultant approval upon making sure that the installation of the system equipment’s done as per approved shop drawings and specs and manufacturer recommendations.

6. RESPONSIBILITIES

Ø  PROJECT MANAGER

1.     To ensure that all the preparation and application works are carried out according to the Contract Specification and with the approved drawings.

2.     To ensure that the progressing of works is carried out according to the planned program and as per the approved method of statement.

3.     To ensure that all the equipment and material required executing the work are available according to the planned construction program.

4.     To co-ordinate with the Main contractor, MEP coordinator, Safety Officer for a safe and proper execution of the works.

Ø  SITE ENGINEER

1.     To ensure that the works are carried out according to the Contract Specification, approved method statement and the shop drawings.

2.     To provide all necessary information and distribute responsibilities to his construction.

3.     To monitor the progress of work in relation with the work program and to report to the Project Manager.

4.     To co-ordinate with the safety officer and to ensure that the works are carried out in safe practicing method.

Ø  FOREMAN

1.     The foreman will carry out his duties by maintaining continuous coordination with the site engineer on daily basis, and ensure proper distribution of the work force on the required and planned locations.

2.     To ensure that his assistant foreman/ charge hand are aware of the job requirements and they have enough information to carry out their duties properly.

3.     To ensure that the daily work is progressing as planned and advice the site engineer of any requirement for additional resources.

4.     To ensure in consultation with the site engineer that the manpower involved in the works are moving as agreed and planned for the work.

5.     To control disposal of waste materials according to the instructions received from the site engineer.

6.     To ensure full coordination with the safety officer to maintain safe working and proper house keeping of the site, following the proved safety measures and further ensure that all his working team are aware of the same to prevent accident and losses.

7.     To inform the site engineer regarding areas ready for inspection.

8.     Foreman and the storekeeper are responsible for the distribution and control of materials.

Ø  SAFETY ENGINEER

1.     Ensure the implementation of all the safety measures in accordance with the HSE plan and everybody aware of it for it’s proper implementation.

2.     Ensure all the implemented safety measures are adequate to maintain safe working on the site.

3.     Inspect all the site activities and train the person to prevent accidents and it’s proper implementation.

4.     Ensure that the site is maintained clean and tidy.

Ø  TECHNICIAN FROM SUPPILER

1.     The carrying-out of work and the proper distribution of all the available resources in coordination with the sub-contractor Site Engineer on a daily basis.

2.     Daily reports of the works are achieved and coordinated for the future planning with the Site Engineer.

3.     Complying with the sub-contractor basic design practices, particularly those related to safety and engineering

4.     Meeting with any type of unforeseen incident or requirement and reporting the same to the Site Engineer immediately.

Ø  STORE KEEPER

1.     Responsible for overall Store operations in making sure to store the material delivery to the site and keep it in suitable area that will keep the material in safe from rusty and damage.

2.     One who will acknowledge the receiving of materials at site in coordination with QA/QC and concerned Engineer.

7. MANPOWER  REQUIRED

Ø  Charge hand and Experienced Technicians

8. MATERIALS  REQUIREMENTS

Ø  Electrical PVC Conduits Components and Accessories

9. EQUIPMENTs  REQUIREMENTs

Ø  The Equipment that will be engaged for Electrical PVC Conduits  Installation will be as follows:

1.     Hack saw

2.     Measuring tape

3.     Cutting plier

4.     Knipex (End cutter)

5.     Bending spring

6.     Drilling Machine

10. WASTE MANAGEMENT

Ø  The Rubbish which would be created from our scope of works will be disposed to the designated dumping ground.

11. SPECIAL CONTROL MEASURES

Ø  The following general control measures against Safety, Environment and Quality shall be required for our scope of work and special control measures are not applicable for us :

·         Proper PPE must be worn at all time

·         Permit to work at height > 2m where applicable

·         Lifting operation permit (using crane) where applicable.

·         Confined space permit where applicable.

·         Approved work method statement and risk assessment will be made available to site.

·         All workers doing the work shall be briefed on this method statement and risk assessment.

12. SUPPORTING  DOCUMENTATION

Ø  This method Statement should be read in conjunction with the below referenced documentations:

  • ITP for Anti – termite Treatment.
  • Insulation Resistance and continuity Test Report.

13. DISTRIBUTION

Ø  Copy of this method statement shall be issued to the following for information / action / comments:

  1. Project Manager
  2. Site Engineer
  3. Foremen
  4. Safety Engineer
  5. Technician From Supplier
  6. Store Keeper