Port Forwarding the Prolink H9200 Router
for HTTP
Before Forwarding a Port Setup a Static IP Address
To
setup port forwarding on the Prolink H9200 router your computer needs to have a
static IP address.
Now
that you have setup a Static IP Address on your computer, please enter the IP
address that you assigned to your computer here: 192.168.1.1
Login to the Prolink H9200 Router
Now we need to know your routers IP address. You can find it a
variety of ways.
Login To The Prolink H9200 Router Using Your Web Browser
Open a web browser like Internet Explorer or Firefox. Enter the internal
IP address of
your router in the address bar of your browser.
Enter your username and password now.
The Default Prolink H9200 Router Username is: admin
The Default Prolink H9200 Router Password is: password
Click the Ok button to log in to your Prolink H9200 router.
How to Port Forward HTTP on the Prolink H9200
If you are having trouble with this
guide, then perhaps PFConfig may be your solution. PFConfig is a software tool that will automatically forward ports for
your Prolink H9200 router to save you time and hassle.
Now that you are logged in to your Prolink H9200 router you
should see the following:
Click the Services button near the top of the page.
Select NAT
Rule Entry from the NAT Options drop down box.
Click the Add button near the bottom of the page.
Forward Ports 80 on the Prolink H9200
We will list a series of lines here that will show you exactly
how to forward the ports you need to forward. HTTP requires you to forward the
80 ports. Go ahead and enter the settings shown above into the NAT Rule - Add menu and then click Submit.
Click
the Close button near the bottom of the page.
Click
the IP Filter link near the top of the page.
Select Low from
the Security Level drop down box.
Select Accept from
the Public Default Action, Private Default Action and DMZ
Default Actiondrop down box.
Click
the Submit button near the bottom of the page.
Click
the Admin button near the top of the page.
You
should now see a new menu. In this new menu, click Commit & Reboot.
Click the Commit button near the bottom of the page.
Click the Reboot button near the bottom of the page.
And that is it! You are done!