Pages

▼

Thursday, November 4, 2010

Reset Your Lost BIOS Password Without Removing The CMOS Battery

Follow these steps:
·                     Restart your computer in MS-DOS mode.
·                     When you get to the C:\> or C:\WINDOWS> command prompt, type DEBUG and press Enter.
·                     A hyphen (-) prompt will appear waiting for you to enter commands.
·                     Enter the following commands, pressing Enter after each one. Note: the o is the letter o and stands for OUTPUT.
·                     o 70 2e 
·                     o 71 ff
·                     q
·                     After the q command (which stands for QUIT), enter Exit.

Then try to enter your BIOS at bootup. The password prompt should now be gone and you should now have full access to it again. However, you will now be at the default BIOS settings and may want to change them to your preference.
at

3 comments:

  1. smanJuly 15, 2019 at 10:23 AM

    Thanks for sharing CCTV bus solutions in dubai

    ReplyDelete
  2. lost_in_woodsJuly 19, 2019 at 11:30 AM

    Thanks for sharing this kind of useful information door controller systems dubai
    access control dubai

    ReplyDelete
  3. emailtaaiJuly 19, 2021 at 12:33 PM

    These Lock Systems Replacement Partsthe traditional keys with better and more secure automation features like remote locking and unlocking. In these locks, a latch or bolt is made to cross the opening between the side of the door and the doorframe, thereby preventing access.Digital Door Locks,also known as keyless doors, the locks replace the keys with a digital screen, where you can put numeric digits as a code. On pressing the specific password, the locks get active and unlock.Unik cctv legacy continues to ensure a high degree of security to consumers with the implementation of latest technology and constant innovation.

    ReplyDelete