Emergency Door Release

Emergency Door Release 

Emergency Door Releases (EDR's) to provide a physical method of unlocking an electronic lock in the event of an emergency. EDR's are usually fitted to emergency exit doorways in higher security areas.
This unique triple pole break glass door release button remains lit permanently. This is so it can be found should the lights fail in the event of a fire. A manual call point (MCP) is a device which enables personnel to raise an alarm in the event of a fire incident by pressing a frangible element to activate the alarm system. A fire alarm call point should be installed at a height of 1.4m above floor level at easily accessible and conspicuous positions.
Illuminated Emergency Door Release button Once pressed to release the doors, the light turns from yellow to light red colour. Only once the reset key is used will the door be secured back in place. EDR is mostly use in door access control system.

Break Glass is not glass!
The button mimics the feel of breaking glass without the owner having to go to the cost and trouble of replacing the glass once it has been pressed. Being 100% re-usable, all the owner/operator has to do is simply insert plastic key provided into the front to reactivate the unit (supply with unit).

You can easily tell when button is activated
Any individual that needs to exit the building or pass through the door simply has to push or press the button. When pushed, it momentarily releases the fail-secure or fail-safe lock of the door. The exit button releases power to the magnetic lock. With this, the door automatically releases and allows free exit. When this break glass unit is activated it permanently unlocks a door until the unit is reset. In addition to the lights changing colour, the sounder will be activated. This sounder can be adjusted as required.

Prevent accidental activation
To prevent accidental activation of the unit and to deter malicious activation of the button, Emergency Door Release resettable Button comes with its own protective cover. This can be removed if you would prefer.

No extra signage needed
The words EMERGENCY DOOR RELEASE appear on the green plastic area above the break glass button. The standard safe condition/evacuation green is also used to ensure the button is easily located.

Features and benefits

·        Protective cover supplied as standard

·        Single gang

·        Adjustable sounder

·        Adjustable LEDs

·        Surface mount

·        Triple pole

·        Resettable

·        Power 12/24Vdc

Technical Information

·        Contact load 125v/3A (approx)

·        Dual-colour indicator

·        Active current 75mA (approx)

·        Standby current 41mA (approx)

·        Approx. Size 85mm x 85mm x 42mm (excluding cover)

If you not able to understand which one is prefect for your building Access Control System, touch with us via ssaintegrate@gmail.com . SSA Integrate will guide you free of cost in this matter.

We wish you a peaceful and safe holiday season, and an exciting, productive new year.