Thursday, August 9, 2012

CS Vs C Mount Cameras


Modern cameras and lenses are generally CS mount rather than C mount. With CS mount cameras both types of lenses can be used but the C mount lens requires a 5mm ring (VM400) to be fitted between the camera and lens to achieve a focused image. With C mount cameras it is not possible to use CS mount lenses as it is not physically possible to mount the lens close enough to the CCD to achieve a focused image.
C Vs CS Mount Lens
 
The physical difference is the CS mount lens is designed to be mounted ~5mm closer to the image sensor than a C mount lens. (C-mount lenses are designed to be mounted 17.526mm in front of the image sensor vs. 12.5mm for CS-mount.) You can always use a C mount lens on a CS mount camera by using a 5mm spacer ring (many cameras now have C/CS selectable adjustment screws or rings). You can never use a CS mount lens on an older style C mount camera unless you are willing to physically modify the camera. Cost wise the CS mount lens is much less expensive since it uses fewer glass elements. Quality of image is the same. C mounts are becoming less and less popular and are generally only used on the more telephoto focal lengths such as 25, 50 and 75mm, and bigger zooms.
 
Both the C and CS mount are 1 inch wide (25.4mm) with 32 threads per inch (0.03125 inches or 0.79375mm). This dimension comes in handy if you need to insert a spacer to obtain proper focus. Unscrew the lens (or unscrew the camera from the mount in the case of telescope use and count the turns until proper focus is obtained. Multiply the above dimension by the number of turns to obtain the needed spacer or washer. (Washers are sometimes used as spacers if there are enough threads available.) Example: 1.25 turns x 0.79 mm = 0.9875 or ~1 mm. Many cameras (especially newer ones) have set screws to allow small adjustments in the distance between the lens and the image sensor.


Troubleshooting
A lot of the time when someone is using a CS mount security camera they will sometimes get a fuzzy picture and not be able to focus the image properly. If you look at what we have discussed so far you can probably figure out a possible solution to this. The most common mistake people make is that they will mount their CS mount lens onto their security camera while the 5mm ring is still attached. This ring is only useful if you are using a C mount lens. By simply removing this ring they will allow the CS lens to get close enough to the CCD chip to obtain a proper focus.
By taking the time to understand these differences in mounting for C and CS mount cameras and lenses you will help prevent damages to your surveillance equipment and reduce your workload.

8 comments:

Anonymous said...

CS Mount Security Cameras:-
When using a CS mount camera you are able to use either CS mount or C mount CCTV lenses; as long as you take the time to mount them properly. When using a CS mount camera you can utilize a C mount lens rather well; however when doing this it will require that you use a 5mm ring that mounts in between the lens and the camera. This ring allows your security camera to have the proper distance between the lens and the CCD chip so it can focus properly. Furthermore if you do not use this ring you run the risk of damaging your CCD chip.
C Mount Security Cameras:-
On the other hand, when using a C mount security camera you cannot use a CS mount CCTV lens. The reason for this is because a CS mount lens needs to be much closer to the CCD chip to obtain a proper focus. Since this is a C mount camera you won't be able to get the CS mount lens close enough to be able to focus.

Anonymous said...

C-Mount Lens
The flange back (distance from the surface where the lens comes in contact with the camera to the focal point) of C-Mount lens is 17.526mm(0.69 inch). This is the only difference between the C-Mount lens and CS-Mount lens. C-Mount lens, as well as CS-Mount, is 1 inch diameter with 32 TPI (threads per inch). A C-Ring (5mm spacer ring) is required when a C-Mount lens is to be mounted to a CS-Mount camera unless the camera has built-in Flange-back Adjusting Ring.

CS-Mount Lens
The flange back of CS-Mount lens is 12.5mm(0.492 inch). This is 5mm shorter than the C-Mount lens and you need a 5mm spacer ring (or, C-ring) when you mount a C-Mount lens to a CS-Mount camera. (So, CS-Mount camera is always compatible with C- or CS-Mount lens. But, C-Mount camera is not compatible with CS-Mount lens. Most professional cameras are CS-Mount cameras and include a C-ring.)

Fixed Mount Lens
While C- or CS-Mount lens can be changed according to your application, the fixed mount lens, usually found on board cameras and mini cameras does not have standard mount size and can not be changed as easily as C- or CS-Mount lens.

Musharaf Jalan said...

thanks for helpful post

sman said...

Thanks for sharing CCTV bus solutions in dubai

shark said...

THANKS FOR SHARING SUCH A AMAZING WORK
cctv for offices in dubai

sman said...

Thanks for sharing Home Security Cameras Installation

iron said...

THANKS FOR SHARING SUCH A AMAZING WORK
GREAT PIECE OF WORK!!!
thermal camera dubai

emailtaai said...

Intercom System Accessories are stand-alone voice communications systems. An intercom system is a device that contains a circuit that is used for transmitting and receiving audio or video. The intercom systems are available in different varieties depending upon the placement and usage of the intercom systems such as office intercoms systems, apartment entry systems, and window intercom systems, etc. Unikcctv provides all types of Intercom systems for offices and societies with industry-best products as well as installation services.