Sunday, November 18, 2012

Understanding Power over Ethernet for video surveillance

PoE was, and is, supposed to make the powering of devices easy. You take your camera or other device that accepts power via the Ethernet port, you plug in the RJ45 jack to the port, and you walk away. Inside the head end, you plug the other end of the same Ethernet cable into a PoE switch or PoE injector and voila, power is magically delivered to the device along with the data connection. In theory, all of the normal worries are gone. AC power or DC power is irrelevant, and you don't even have to worry about over-powering a camera that, were you to fry it, could potentially set you back a few thousand dollars in equipment costs and man hours!
PoE was supposed to be this way, but practical reality has diverged from the perfect world concept in such a way that the actual installation is almost never that easy. So set aside the “perfect world” notions you have, and let’s start with the basics, so you can understand how PoE works.
There are four classes of PoE: Class 1, 2, 3 and 0. Each PoE classification denotes a range of power that is available to the end device as well as the power that must be available on the port of the power sourcing equipment (PSE):
PoE Classifications
  • Class 1 --  4.5 watts at PoE port; 3.84 watts at device
  • Class 2 --  7.5 watts at PoE port; 6.49 watts at device
  • Class 3 --  15.4 watts at PoE port; 12.95 watts at device
  • Class 0 --  15.4 watts at PoE port; .44 to 12.95 watts at device
In the world of PoE there are two kinds of switches that can provide PoE; the kind that operates with a “guarantee per port” and the kind that operates with a “total power budget”. Both kinds of switching are useful but there is a significant difference between them. If you happen to have a switch nearby, look at it and see if you can tell into which one of the above two categories your switch falls.
A switch that guarantees a certain wattage per port -- 15.4 watts per port, for example -- means that you can be sure that no matter how many Class 3 or Class 0 devices are plugged in, the switch will be able to power them. Of course, these switches tend to be bigger, more expensive and ill-suited for use outside of a nice climate controlled room, but they do prevent errors in power planning.
The second type of switch mentioned above -- the kind with a total power budget -- can only power as many PoE devices as it has power to spare. Imagine that you are working with a 4-port switch that carries a total power budget of 30 watts. This kind of switch could power four Class 2 cameras (4 devices x 7.5 watts = 30 watts needed). It could also easily power four Class 1 devices (4 devices x 4.5 watts = 18 watts needed). Continuing with that math, it would be able to power Class 3 or Class 0 devices, but it could only power two of those types of devices.
Power planning is where the rubber meets the road, and it brings up a challenge in our industry.
What happens if a chosen device (i.e., a PoE powered camera) does not clearly specify the PoE class and instead simply gives an operating wattage? You might think that this is OK since a camera which says “6.01 watts” is within the Class 2 specifications and therefore must be Class 2. But that’s where reality often diverges from common sense. In theory, what is supposed to happen is that a device is clearly labeled with a PoE classification so that when said device is plugged into a PSE device, the power budget has been worked out such that each device will receive its required PoE.
What I believe the security industry needs – right now, since PoE is happening today -- is clear labeling of the correct classification of PoE on each and every device that uses PoE. It is all well and good to place the operating or maximum wattage on the device, but industry manufacturers need to take the next step!
Manufacturers should label the device, print it on in large type and with bold colors, CLASS 1, CLASS 2, CLASS 3, CLASS 0, or whatever PoE Plus will hold as a classification. It's OK if your device actually only draws 3 watts during normal operation but for some reason is Class 0. Just tell your integrator channel partners and end users by labeling the device in the manner in which it was intended to be used. This lets system designers know the classification so that they might properly create a power plan and buy the correct devices. No one wants to be in the field trying to get a project done on time and only then realize that their switches don’t have enough power for the devices they’ve purchased.
While I am solidly standing on my PoE soapbox, let me also make a plea for PoE classification to be a priority on data sheets and marketing slicks. Some camera manufacturers make wonderful versions of these spec sheets. You’ll find photos, technical illustrations, cross reference charts, and more -- and often not a hint of PoE classification to be found anywhere. As someone who works with PoE, it sometimes seems as though PoE has become the crazy uncle that everyone has and who no one wants to invite to the party. Unfortunately for all of us, the crazy uncle could actually be the life of the party -- he makes it easy to entertain the guests and always has enough cash to pay for pizza -- but we haven't managed to take advantage of him yet!
PoE is supposed to make things easy, and between the standards bodies, the independent PoE offerings, the lack of classification usage, the errors in PoE chip usage within devices, and the propensity of some manufacturers to create Class 0 signatures in devices that draw minimal wattage, PoE's original purpose has been obfuscated in a way only rivaled by the current explanation of the financial bailout.

Why has it become so complex? Who knows! Unfortunately it has, and confusion has also shared a taxi with a lack of education on the road to PoE's widespread acceptance. People see a label on a device that says “802.af” or “IEEE Compliant” and then automatically assume that they can plug it into a PoE switch or midpsan and have it work with no problem. What makes the education problem worse is that often it does work with no problem, and this leads people to the assumption that PoE is really nothing more than Windows “plug and play” for power. Unlike Windows, however, there is no “blue screen of death” when using PoE. Instead there is a device that does not power on, or (in rare cases) a device that does power on followed by smoke, the smell of singed chip boards and fried capacitors, and then what was a very expensive security device becomes an equally expensive paperweight.

9 comments:

Anonymous said...

ohoo its just post...& i comment.....
Most advanced MIdspans and PoE switches ignore classification and allocate power based on the actual device consumption. This works since the class is a worst case number, rarely met by a given device and even more rarely met by all devices connected to a PoE Midspan or Switch. The author simply ignores how MIdspans and switches with less than 15.4W operate... Examples exist from PowerDsine, 3COm, Nortel, Cisco...
Daniel Feldman

Anonymous said...

Very good article. You really explain some of the key issues that are going on right now with POE and IP cameras. I am making recommendations to our production team based on this article.
Thanks
Peter Brissette
GSP America

SM Infotech Solution said...

Nice article there is a lots of benefits of video surveillance .In short we can say there is lots of benefits of all security system that all are we used for our safety.we can handle control on our office,home by using security system installation service in Guwahati.

sman said...

Thanks for sharing CCTV bus solutions in dubai

nike said...

Thank you for the information people counting solution

nike said...

Thanks for sharing Home Security Cameras Installation

sman said...

Thanks for sharing tripod turnstiles dubai

iron said...

THANKS FOR SHARING SUCH A GREAT WORK
GOOD CONTENT!!
Dubai Ip Camera

emailtaai said...

These Lock Systems Replacement Parts the traditional keys with better and more secure automation features like remote locking and unlocking. In these locks, a latch or bolt is made to cross the opening between the side of the door and the doorframe, thereby preventing access.