Thursday, September 15, 2022

The 5 D’s Of Outdoor Perimeter Security For Business

The 5 D’s Of Outdoor Perimeter Security For Business 

When it comes to your business, you must ensure that every inch of it is protected. Many people ignore the outdoor perimeter of their establishment and focus on the inside. However, the outdoor security of your business is equally important. To protect your building’s entire structure, there is a key security principle that you can use: The five D’s. They are Deter, Detect, Deny, Delay and Defend. Each plays a specific role in securing your business’ exterior.

Deter

Your first line of defence is deterrence. In order to keep criminals away, you have to deter them from even thinking about setting foot on your property. To create a shield of deterrence, you need to start simple with signs. Put up signs that say “No Trespassing,” “Property Under Surveillance,” “We review CCTV footage Everyday”, “Guard Dog on Premises” and “Security Personnel On Duty 24-7.” You may not have a guard dog but the suggestion of one could be enough to keep criminals at bay. Another line of deterrence is to have surveillance technology. Having CCTV security cameras visible will discourage criminals.

Detect

Protect your building’s perimeter with equipment that can detect trespassers. Surveillance cameras, motion sensors, and other security equipment that can sense movement are all must-haves to ensure that anything out of the ordinary is detected.

Deny

To keep your perimeter secure while letting authorized personnel come and go, you need to deny those who aren’t supposed to be there. With a manned security gate at the main point of entry, anyone who isn’t supposed to be coming and going will be stopped immediately. Another way to deny criminals entrance to your property is with card access. This is an added security measure that ensures that even when people are in the building they need to use an access card to get into certain areas. You can even have your employees scan their cards at the manned security gate.

Delay

A delay system should be in place in case something should go wrong with your security system and an intruder is able to penetrate the building’s perimeter. This can be done through interior locking doors and barriers. By having a delay system you give your security team and the police enough time to respond to the intrusion and the criminal cannot get away.

Defend

To defend your perimeter against intruders you will need the help of local law enforcement and your security personnel. This involves having a protocol in place for making sure a criminal is being watched during the time period after they’ve been apprehended by your security personnel, and the time law enforcement arrives scene.

Creating optimal outdoor perimeter security requires planning. However, once you have the Five D’s in place, you can rest assured that your business is safe.

For, free suggestion consultancy about security alarm system can contact SSA Integrate via mail ssaintegrate@gmail.com 


Thursday, September 1, 2022

IP surveillance camera Installation for small industrial complex

IP surveillance camera Installation for small industrial complex 

As someone that is in the industry, I get this question on a Weekly basis. “Do I need IP or Analog cameras for my Company / Small Scale Industry?”  The answer to this question is quite simple, “How important is your stuff & Property?” There is one major truth about IP cameras that some people find hard to swallow and I am going to be very blunt about it, “Yes, they are more expensive”. Budget is another factor to consider. Small business owners often have to make budget their primary concern and want a quality camera that is easy to install, accessible on mobile, and hassle-free. Quite often selecting the best video surveillance camera is all about the best option within a limited budget.
End-users should look at the total cost of ownership, including warranties and cybersecurity protection. To achieve more cost efficiencies, end users will want an intelligent system, and again, this requires video analytics.

They are more expensive BUT the Cost vs. Price analysis shows that they are in essence less expensive when considering what you actually get with the IP camera solution.  So what do you get, Clarity is the huge one. With the right IP camera you can catch such great detail that you can not only see and describe who is walking up to the door, but the camera system can recognize the face, store it, and give you the exact time the person walked up to the door. While the camera system is doing this it also has the capability to catch the make, model and license plate of the car s/he drove up in. And if that wasn’t enough, the camera system can count the number of people that walk up to the door, pull into the drive way, or even walk by the house. And believe it or not, the system will even send you an email if someone walks up to the door after hours. The system can alert you if the UPS man walks up and leaves a package, or it can alert you if you have something on the porch and it suddenly walks off.
Can you get this type of clarity with an analog camera system?  Maybe?  On a clear day? The honest answer: probably not. Can you get these extra features like facial detection with an analog camera system? That answers easy, NO.
 
So now I ask the same question that I asked above, “How important is your stuff or property?”  or the real question is “How important is your safety?”.
 
Cybersecurity, encryption, and infrared imagery are also growing trends that are currently driving the selection of video surveillance cameras, especially for government and other critical infrastructure customers.
These facilities often prioritize cybersecurity, so procurement officers look for a system that meets regulatory requirements, is secure, and highly reliable — one that protects the data from the camera to monitoring.
Location and threat type factor into the decision as well. Even the best outdoor security camera system won't be effective if installed indoors. Thermal cameras can detect potential intruders at a distance of up to 15 miles, providing an extra margin of response time. Explosion-proof cameras, commonly used in hazardous industries, are hardened with protective housing.
Another factor end users need to consider is installing a completely new system or adding to an existing one. With a new build, they have a blank canvas to work with that can be customized to match the end user's needs rather than retrofit new equipment to an existing system.
 
The most critical factor in selecting the best video surveillance camera is to understand its ultimate purpose — the problems it's required to solve and what it's expected to provide in the way of detection, identification, and data-mining capability. Pain points such as 24/7 monitoring of the premises and compliance requirements set by the enterprise business policies all need to be considered during the selection process.
 
Determining the number of areas of interest, how much of them to cover, and how close they are to each other is the next step. These parameters will determine the types of cameras required and how many. For example, you can achieve adequate coverage of an area using multiple fixed cameras or with just a few pan-tilt-zoom (PTZ) cameras.
 
Risk assessment should be performed to ensure the design of the system results in an installation that adequately addresses the threats and reduces the security risks. In order to identify the level(s) of security required (and potentially therefore the grading of the elements of the system), an assessment of the factors which are likely to come into play is required. In very global terms, from a security perspective these elements are typically considered as:
Threat (Who): The threat will typically be defined as the persons or events to be protected against. Threats will vary greatly in termsof objectives, determination, capability, resourcefulness,
Vulnerability (What / Where): The vulnerability will typically be the areas of concern that require protection. The level of vulnerability will be defined by numerous factors such as desirability of the objects in the area, ease of access, operational hours of the environment, exposure / secluded nature of the area.
Risk (What if?): Risk is effectively the consequence of a successful or attempted intrusion or event. These risks can be wide and varied and not immediately obvious. Risks and impact levels of each identified risk will typically vary depending on the nature of site. Risks can include:

1.   Immediate Financial Loss: Immediate value of items lost.

2.   Ongoing Financial Loss: Increased insurance premiums, time to return to profit.

3.   Personal Safety: Injuries to staff and / or members of public involved in violent incident.

4.   Stress Related Issues: Reduced staff morale, loss of staff due to safety concerns.

5.   Non-financial loss: May include loss of intellectual property, company data or similar.

Typically security systems cannot change the identified threat or alter the risk, but well deployed security measures significantly reduce the vulnerability. This in turn helps to reduce the likelihood of risks occurring.
 
These services are provided in different environments, such as swimming pools, fitness areas, dining halls, common areas and individual rooms. Each area has its own potential risks; for instance, guests can slip and fall near the swimming pool area if not properly maintained or they may get injured in the fitness area. Some of the most common causes of injury in these places are:

1.   Physical Attacks: Although the premises of hotel and hospitality providers are considered safe, in some crowded and low budget hotels, criminals may attack guests for their money. In these situations, the presence of outdoor surveillance cameras acts as an evidence against those criminals.

2.   Slips: Usually, the flooring is not similar in all areas of the premises. The guests being new generally do not pay much attention towards the uneven flooring and so they may slip and fall. Moreover, cracked flooring, worn-out carpets and wet floors are some of the major causes of slip and fall accidents.

3.   Broken Furniture: In order to save money, some hotels do in-house repair of furniture that broke down due to overuse. Because of its age and some guests’ weight, the furniture may collapse and injure the guests.

It is important to consider the level of detail required in an image so that it matches the need of the user. This should be discussed with the client. The practical effect of this is that a camera may need to have a wider or narrower field of view so that the necessary amount of detail can be seen and that in some circumstances more cameras may be needed, either to increase the area covered with the same detail or to allow for different levels of detail to be seen from the same view.
 
Whether the different levels of detail can be achieved using a single PTZ or single camera of high resolution is a matter that should be agreed.
 
A lens is a transparent optical device with perfect or approximate axial symmetry which transmits and refracts light, converging or diverging the transmitted light and to form images. A simple lens consists of a single optical element. A compound lens is an array of simple lenses (elements) with a common axis; the use of multiple elements allows more optical aberrations to be corrected than is possible with a single element. Lenses are typically made of glass or transparent plastic.

The measure of the fine detail that can be seen in an image. For analog systems this is typically measured in Television Lines or TVL. Higher TVL rating, the higher the resolution. Same way megapixel (MP) like 1.3mp, 2mp, 4mp, 8mp etc.
 
Resolution-horizontal
The amount of resolvable detail in the horizontal direction in a picture. It is usually expressed as the number of distinct vertical lines, alternately black and white, which can be seen in a distance equal to picture height.

Resolution-horizontal - vertical
The amount of resolvable detail in the vertical direction in a picture. It is usually expressed as the number of distinct horizontal lines, alternately black and white, which can theoretically be seen in a picture.
 
Detection, Recognition and Identification (DRI) in video surveillance is very important terms to get image details. DRI ranges, expressed in meters, km (or miles), can be found in the specification table of infrared camera brochures.
The terms “Detection”, “Recognition” and “Identification” were defined as follow:

·        Detection: ability to distinguish an object from the background

·        Recognition: ability to classify the object class (animal, human, vehicle,  …)

·        Identification: ability to describe the object in details (a man with a hat, a Jeep …)

As a best practice, do not assume the camera resolution is everything in regards to image quality. For a camera to operate in a day-night environment, (the absence of light is zero lux), the night mode must be sensitive to the infrared spectrum. It is highly recommended to conduct tests or pilot installations before buying large quantities of any model of camera.

Considering Small Scale industry owner agreed to install PTZ cameras & as per below drawing want to execute this project.

Considering Product Make is under NDAA Compliant IP Surveillance Cameras

BOQ of this Projects are

SL NO

Item Description

Qty

1

Supply of 1080p Resolution IP IR Outdoor PTZ Camera 4.6mm-165mm Vari focal Lens, 36X optical Zoom, 1/2.8" SONY Starvis Back-illuminated CMOS Sensor. IR 120Mtr and True Day/Night.

2Nos

2

Supply of 04CH Embedded Linux NVR with upto 6TB SATA Port; H.265; 1nos HDMI out, 1Nos USB.

1Nos

3

Supply of 2 TB Surveillance Hard Disk for NVR

1Nos

4

Supply of 04 PORT Network Switch for IP  Surveillance Camera

2Nos

5

Supply of 2C 1.5sqmm Armour Copper FRLS Cable.

90Mtr

6

Supply of 20mm PVC Conduit/ PVC Casing with accessories

30Mtr

7

Supply of CAT6 Cable to connect IP Camera to switch

 

8

Supply of 2U Rack for Network Switch.

1Nos

9

Supply of 9Mtr PTZ Camera MS Pole Powder Coated without Junction Box arrangement for One PTZ camera installation.

1Nos

10

Supply of Junction Box, Welded body construction in CRCA MS sheets.
Size: 600mm(W) x 200mm(D) x 450mm(H). Single hinged front door in 2mm thk with lock and foamed in place gasketing. Powder coating shade RAL 7035. For One Antenna injector, Camera Power Supply & Switch etc.

1Nos

11

Supply of 867Mbps 5G High Power Outdoor PTP Antenna for Two Camera

2Nos

12

Supply of 32” Surveillance Monitor for Viewing two PTZ camera

1Nos

13

Supply of CCTV Signage (We Checked Video Footage Every day)

2Nos

14

Installation, Testing, Commissioning & Handover including all documentation, arrangement, Transportation, Lodging Fooding.

1 Lot

 Note: Civil work in customer Scope. UPS power arrangement is in Customer Scope.

Display screens may be desk or wall mounted with consideration given to the ergonomics of the operator. The display screens should be installed to minimise the effect of lighting, particularly sunlight, which can adversely affect the viewing experience. Wall or ceiling mounted display screens should be mounted using suitable brackets in accordance with manufacturer’s instructions.
Consideration should be given to the positioning of such screens to ensure they are above head height or not in a position where people may bang their head on them.
Your guest needs to be aware that they are entering hotel area that is being monitored by CCTV surveillance equipment. Signs should be placed so that they are clearly visible and legible. The size of the sign will vary according to the circumstances of its location.



Incident Response

Locally agreed procedures should detail the action to be taken in the event of an incident. These procedures should conform to those laid out as below:
• Action to be taken
• Who should respond?
• The timescale for response
• The times at which observation should take place
• The criteria for a successful response
• CCTV operators should maintain a record of all incidents in the appropriate incident log.

The overall indicator of successful response to incidents is that the CCTV scheme fulfils its objectives, i.e.:
• Restoration of tranquility
• Dispersal or control of the situation
• Prevention or minimization of injury and damage
• Reduction of crime and disorder, to improve safety and reassure the guest
• Identification of a suspect
• Gathering relevant information to assist in the subsequent apprehension of offenders
• Apprehension of a suspect with evidence
• Guest safety through effective evacuation
• Traffic flow restored
 
Our CCTV projects are intended to reduce cases of theft and misconduct in the organisation premises. Like any other project, our CCTV projects will involve a degree of cost to the client, in terms of the cost of the installation, maintenance as well the impact it will have on personal privacy within the precincts of the organisation/ business premises.
SSA Integrate  will carry out a detailed survey of the area under surveillance and armed with experience in the field of public / social control techniques is proposing to install/ deploy CCTV and/ or alarm surveillance system that will make it possible to have a real time total visibility of the Areas under surveillance.
CCTV can be effective in reducing or preventing crime if it is part of a broader crime prevention and community safety strategy, as such, it should not be implemented as the only means of addressing crime in public places.