Saturday, April 2, 2016

Convert DVI-D to VGA

Convert DVI-D to VGA

VGA (Video Graphics Array) is a hardware specification for display monitors and computers that allows a computer to display applications on a VGA-based monitor via a VGA cable. VGA technology is one of the oldest forms of display hardware in computing and is outfitted in virtually every computer system in the world. VGA uses analog signals but is compatible with most digital devices. While DVI technology has superseded VGA technology, both specifications are often included in personal computers, with VGA technology being much more common in laptop computers than desktop computers.
What is DVI-D?
DVI (Digital Visual Interface) is a hardware specification for computers and display equipment that is similar to VGA. DVI-D (Digital Visual Interface Digital) refers to DVI technology that is used exclusively with digital devices, while other versions of DVI can be used with analog devices. While VGA technology was made for analog computers, DVI technology is more modern and is intended for digital computers and display equipment, such as monitors and projectors. While VGA and DVI produce similar quality on regular monitors, DVI produces much higher picture quality on LCD monitors and other high-definition equipment.
How to Convert DVI-D to VGA
In order to convert DVI-D to VGA, either a DVI-D to VGA conversion cable or a DVI-D to VGA adapter must be implemented. DVI-D to VGA conversion cables and adapters are similar but the conversion cable allows the user to separate the devices over a short distance while the adapter requires the devices to be back-to-back. Most display devices have their own cable, allowing the user to connect the adapter to a DVI port and use the VGA cable to bridge the distance between the two devices. Either method allows the user to convert DVI-D digital signals into VGA analog signals so that a DVI-D source device can be used with a VGA output device.
Applications

A user may wish to convert DVI-D signals into VGA signals if he/she is using a DVI-D computer and a VGA monitor or projector. DVI-D technology is found in most modern digital equipment and should be used with a DVI-D output device, such as an LCD monitor. However, if the user’s output device is older than the source device, it may depend on analog signals and not have a DVI-D port.

Friday, March 18, 2016

Rising Biometrics Security Market Growth

Rising  Biometrics Security Market Growth

Biometrics has been the next big thing for over two decades.  Persistence Market Research released its own report entitled “Next Generation Biometric Market – PMR Market Insight Report 2015 to 2021”, in which the biometrics market is expected to grow at a significant growth rate.

TYPES OF BIOMETRIC DEVICES

• Automated fingerprint identification systems (AFIS)
• Palm and vein reading systems that supplement AFIS
• Non-automated fingerprint identification systems
• Facial recognition
• Iris scans
• Integrated AFIS, face, and iris systems
• DNA readers
• Biometric signatures
• Data encoders
• Bar coder
• Document scanner


According to the report, this explosive growth rate can be attributed to the increasing occurances of terrorism and the theft of crucial data and information, which have raised concerns about national and personal security.

The report covers a number of key topics, including market segmentation according to types, application, products and technology; geographic segmentation including North America, Europe, Asia and RoW; the market size and forecast for the different segments and geographies; company profiles of some of the market’s leading companies; and Porter’s five forces analysis of the market.

The report highlights some of several key drivers of the market, including the growth in e-passport program, government support and extensive use in criminal identification. Additionally, the increasing need for large scale surveillance at public gatherings and penetration of smartphones will also drive the global next-generation biometrics market.

In terms of challenges that hinder the growth of the global next generation biometrics market, the report singles out high cost of systems and fear of privacy intrusion.
In early 2015 Mobey Forum carried out a survey about biometrics amongst 235 respondents from Europe, North America and the Middle East, 59% of which were from banks and other financial institutions and 32% were from solution providers. 

The paper focuses on the applicability of biometrics as a method of identification, authentication and authorisation for services in mobile banking and payments services. It contends that the acceleration of mobile in the banking sector has been critical for getting biometrics out of the starting blocks. In partnership with mobile, biometrics offers considerable benefits, especially with regard to user experience. It should be noted that biometrics is also potentially valuable in other areas of financial services such as employee screening, know-your-customer, online dealing transactions, and insurance.


For banks and payment service providers, security is a minimum requirement, but convenience wins customers; they will not adopt security measures that are inconvenient. This is confirmed in the results of the survey and also by prevailing consumer attitudes to biometrics. Fuelled by the Apple ‘cool’ factor, users appear generally positive towards biometrics at this point, even across a range of age groups.
At the same time, historic concerns about biometrics, for example with regards to accuracy and price, are no longer so pressing. Other concerns, like security, however, still are. For biometrics to succeed, it must be used in combination with secure technologies for storage and processing.
Mobey Forum survey shows that the vast majority of banks intend to implement biometrics in the relatively near future, just as the number of handset manufacturers planning to integrate biometric capabilities into their devices rises.

Conversely, the growing use of biometric technology in e-commerce and cloud computing for biometric technology will serve as an opportunity, which should help fuel the growth of the global biometrics market.
The report identifies some of the key players dominating the market, including 3M, Cross Match Technologies, Inc., Facebanx, Fingerprint Cards AB, Fujitsu Ltd., Fulcrum Biometrics, NCE Corporation, RCG Holdings Limited, Safran SA, and Siemens AG. South Korean biometric technology firm VIRDI has integrated its access control solution with HIKVISION.

The new solution brings multi-factor recognition to the HIKVISION iVMS-5200P video surveillance software by allowing various authentication methods, such as a card, pin number, fingerprint, face, and mobile key. The total solution is based on ONVIF (Open Network Video Forum) which is a global standard. VIRDI’s managing director of sales commented in a statement that: “We will expand our overseas business cooperating with the global enterprise in security industry.”

The company had previously successfully integrated its fingerprint authentication system with PAXTON’s enterprise access control solution.

Biometrics technologies used for measuring and evaluating human body characteristics, like fingerprints, irises and retinas, vocal and facial patterns for authentication and identification purposes. A prominent rise in the embracing of biometrics technology can be seen in India over the last five years. In addition to the most high-flying and well-liked technique of biometric authentication, which is fingerprint recognition, additional means of biometric authentication are swiftly gaining traction in the country on account of the rising need for data security in miscellaneous sectors. India Government initiatives such as issuance of e-passports and emergence of e-banking and visa employing biometric systems for identification and authentication purposes, have been enormously boosting the use of biometric technology.


The growth of Biometrics in India is predicted to be massive on account of the proliferated uses of biometric devices in public as well as Indian private sectors. The need for enhanced security and to authenticate the access to confidential data has made the use of biometric devices mandatory for better performance of the organization. The report segments the market by end-user and geography. The report finds the major drivers for the face and voice biometrics market include growth in e-passport program, government support, biometrics in smartphones, use of biometric technology in banking and healthcare, extensive use in criminal identification, use of biometric technologies in election administration and growing need for large scale supervision at public meetings.


Latin America is one of the fastest growing regions in global biometrics market with countries such as Brazil, Mexico, and Argentina contributing majorly for the growth of the market. Market growth in Latin America would result from government expenditures and customer focused corporate investments. Brazil accounted a major share on the whole Latin America’s biometrics market. Government spending, increasing security spending, cybercrimes and deployment of face recognition scanners across borders and airports of countries, are the factors that are making the biometrics technology grow lucratively in Latin America.

Mexico is expected to grow with more number of projects such as national ID, voter ID, e-passports, e-driver’s license, and ID cards based on biometrics. Mexico is one of the key countries in global biometrics market, which is utilizing fingerprint, face and IRIS based biometric systems in its national ID project. Mexico and Argentina are developing their own biometric national ID systems to avoid identity fraud. Biometric identification system can help facilitate advancements in social, political, and economic development.
Demand for biometrics access control systems is expected to increase in the next two years. Brazil biometrics market is emerging as one of the fastest growing biometrics markets in Latin America. Sporting of international events such as FIFA World Cup 2014 and Olympics 2016, escalating private investments, rising security concerns and increasing government security spending, are the factors driving the growth of biometrics in Brazilian market. With the increase in the demand for these devices, more number of local manufacturers would want to step up their presence in the market.
The report offers the countries showing growth in Latin America and emerging companies along with a list of their Financials and presents a host of investment opportunities ready for the taking. This report on the outlook for lucrative investment areas reviews the potential future returns, technological advancements, regulations and market responses so as to provide a clear perspective on the potential implications for the growth prospects of Biometrics Market in Latin America during the forecast period (2014-2020).
DNA analysis market in the government sector in North America is growing at a CAGR of more than 10%. North America is an early adopter of DNA analysis technology due to high investments by government and law enforcement agencies in the US and Canada. However, the market is likely to experience saturation and a reduction in contribution from the government sector during the forecast period.

The DNA analysis market in the government sector in Europe is growing at a CAGR of close to 13%. The demand for DNA analysis solutions is augmented by increased security concerns at airports, railways, seaports, and borders caused by terrorist threats.

Saturday, March 12, 2016

IP surveillance with Power over Ethernet

An increasing number of businesses, school districts and healthcare facilities are delving into Smart Ethernet switches with Power-over-Ethernet (PoE) technology—and reaping big benefits for their IP Surveillance networks. Power over Ethernet technology describes a system to pass electrical power over Ethernet cabling, along with data. This means that a network device can be powered and operated using the same cable as for network connection, eliminating the need for power outlets close to an IP camera, for example. However, in order to save money on installation and increase the security level by using PoE, it's important to keep certain key points in mind when dealing with the technology. This article will guide you through equipment and standards within PoE that will help you succeed in the field.

Power over Ethernet, or PoE, is not a new technology and it's already widely utilised in networking, for example in IP phones, wireless AP's and IP cameras. The first successful design and implementation of a proprietary PoE system was accomplished by Cisco in the year 2000. Their technique of putting 48V DC power on the LAN data cable along with the data traffic helped them overcome their customer's objections to wall adapter powering – and in the end also helped them to sell a lot of VoIP phone systems.
The PoE scheme
In a PoE scheme, two different types of devices are involved: power sourcing equipment (PSE) and powered devices (PD). A PD is a PoE enabled network end device, such as an IP security camera, equipped to accept low voltage power transmitted over Ethernet cabling.
A PSE on the other hand, is a device that provides ("sources") power to the Ethernet cable. Power is supplied in common mode over two or more of the differential pairs of wires found in Ethernet cables and comes from a power supply such as an Ethernet switch. There are two types of PSEs which can add PoE to your network: endspans and midspans. Endspans are Ethernet switches that include the power over Ethernet transmission circuitry and are commonly called PoE switches. Midspans are power injectors that stand between a regular Ethernet switch and the powered device, injecting power without affecting the data.
IEEE standards In June 2003, the IEEE working group released the ratified IEEE 802.3af PoE standard. It provides up to 15.4W of DC power (minimum 44V DC and 350mA) to each powered device. The maximum current of IEEE 802.3af is 360mA. The output voltage range of IEEE 802.3af is from 44V DC to 57V DC.
In 2010, IEEE ratified a new PoE standard, 802.3at, which provides 30W of DC power to the PD. The maximum current of IEEE802.3at is 600mA. The output voltage range varies from 50V DC to 57V DC. The IEEE 802.3at standard is also known as PoE+ or PoE plus.
The four PoE phases Every PSE is responsible for managing four basic aspects (or phases) of PoE:
  1. PD detection
  2. PD classification
  3. Power-up
  4. Power-removal
PD detection and PD classification are carried out through complex signaling protocols which make sure that power is delivered to the PD according to the classification. It prevents powering when no PD is connected and assures prompt power removal when a PD is disconnected. The protocols also maintain a stable DC current flow at all voltage levels. A PoE enabled PSE provides a low power signaling mechanism that constantly monitors for a 802.3 powered device (PD) to appear at the end of the LAN cable. If a non-powered network device is connected, the PSE can function just as a non-PoE and perform an "ordinary" link to the networked device. However, if an 802.3 PD is connected, the PSE will quickly recognise this and begin the process of powering it up.

Cables The IEEE standard for PoE requires Category 5 cable (CAT-5) or higher for high power levels, but can operate with Category 3 cable for low power levels. But still, even high quality outdoor Category 5 cable (CAT-5) is much cheaper than USB repeaters or AC wire.
Fault protection To minimize the possibility of damage to equipment in the event of a malfunction, the more sophisticated PoE systems employ fault protection. This feature is good to have and shuts off the power supply if excessive current or a short circuit is detected.
UPS PoE can increase your security level through a so called central UPS (Uninterrupted Power Supply) in the monitor room or central control room where the PoE Ethernet switch is located.
In case of a power outage, critical networking devices will become inoperable unless they are protected by a UPS with battery backup. Having the networked equipment distributed throughout your building or campus requires the distribution of several UPS systems. With PoE, a single, centrally managed UPS can be used to supply backup power to your PSE equipment. All the distributed PD networking devices can then receive battery-backed power even in power outages.
Centrally managed power also enables remote shutdown or remote reset capabilities. Through managing a PoE-enabled LAN switch via a web browser or by SNMP, remote networking devices can be easily reset or shut down saving the time and expense of dispatching a technician.
PSE Conformance Test is important despite the various requirements described for PD detection signaling in the 802.3 specification, there is considerable room for design variation. In practice, detection pulses and detection measurement schemes do vary significantly across PSE interface technologies. The 802.3at specification leaves considerable room for implementation dependent behaviours. Additionally, many vendors of PSE will choose to go outside the 802.3 specification in ways that will affect the ability to power and maintain pure 802.3at PDs. This high degree of variation adds a number of PoE compatibility issues, such as problems with voltage levels.
PoE challenges design and test engineers a great deal. Evaluating the quality of a PSE comes down to having to work with "smart" multi-channel DC power sources that are activated and deactivated through signalling protocols operating over several power delivery and polarity configurations. The application and management of DC power over multiple local area network connections must be completely transparent, safe, non-destructive, and non-disruptive to the traditional data transmission behaviours of those network connections and associated network equipment.
for example, has over ten years of PoE Ethernet switches design experience, and in the quality assurance lab every PSE needs to pass the PSE Conformance Test Suite offered by Sifos Technologies. The test suite for 802.3at produces up to 115 test parameters depending upon PSE capabilities. These parameters are measured in 23 distinct tests that cover over 95 percent of the PSE PICS (conformance check list items) in the IEEE 802.3at specification. The test is widely used throughout the networking community as the industry "norm" for PSE specification compliance.
Due to the fast pace of this sector, with most equipment having a realistic lifespan of around five years, it is most important to buy a fully qualified system. If you buy equipment which is not fully conformant to IEEE 802.3at or IEEE 802.3af, you might end up having to deal with a real nightmare in the future.
A few of the advantages with PoE
  • Equipment can be placed in the most optimal location instead of choosing one where power is available.
  • Network installations can be accomplished cheaper, easier and faster.
  • Network changes, such as adding, removing or moving something, can be made much easier.
  • Using a PoE infrastructure enables centralised power management capabilities for critical network devices.
  • PoE can be used in security applications where USB or AC power is unsuitable, inconvenient or too expensive to use.

Friday, March 4, 2016

How Switchers, Quads & Multiplexers Work

How Switchers, Quads & Multiplexers Work



A Switcher will sequence between multiple cameras to allow viewing and or recording of each camera full screen one at time. Dwell time is adjustable. Playback of video tape will be of cameras sequencing.

A Digital Quad will allow viewing and or recording of up to 4 cameras on one screen at one time. Playback of recorded tape will be in 4 quadrant format.

A Multiplexer will rapidly sequence full screen through each camera for recording purposes and allow single camera or multiple-camera screen formats while viewing (duplex) or playback (simplex and duplex). Video tape of any one camera can be played back in sequence.

Choose the right type for your application:

SEQUENTIAL SWITCHER:

Allows automatic sequencing of selected cameras to a video monitor or VCR. Variable dwell time settings are available. Call any camera instantly for continuous observation. A Homing Sequential Switcher has one single output and can be set to display and/or record a single camera or all cameras in sequence. A Bridging Sequential Switcher has two outputs and can display a single camera on one monitor and sequencing cameras on a second monitor simultaneously. An Alarming Switcher will allow for the input of a dry contact closure for a motion detector, etc. When an alarm is detected on a specific channel it will stop sequencing and lock on that camera for single camera recording. Playback from a VCR will be in single camera or sequencing mode as it was recorded.

Homing Switcher
Bridging Switcher
Alarming Switcher
 DIGITAL QUAD:
View up to four cameras simultaneously, sequence through all or selected cameras, or select one camera for full-screen display while recording to VCR in quad format. Not all quads allow for viewing of "live" video.

Quads

 SIMPLEX MULTIPLEXER:
Allows you to display "live" single camera full screen pictures while full screen recording all cameras. You may also play back any single camera in sequence or all connected cameras for detailed event analysis. Playback images can be displayed in a variety of multiple-picture screen formats. All recorded images must be played back through the multiplexer.

A simplex multiplexer is very useful where there are multiple locations with multiplexers, or where there is no on-site monitoring. An example might be a chain of stores where the tapes are brought back to a central office for review or an unmanned recording station with no on-site monitoring.

DUPLEX MULTIPLEXER:

Allows you to display "live" single camera full screen pictures or a variety of multiple-picture screen formats while full screen recording all cameras. Allows you to record "live" cameras on one VCR while simultaneously processing and replaying video from a second VCR. Playback images can be displayed in a variety of multiple-picture screen formats or single camera formats while simultaneously recording. Multiple-picture screen formats will not be "live". All recorded images must be played back through the multiplexer.

A duplex multiplexer is useful for applications where monitoring is a key part of the system function and where video tapes need to be viewed regularly.

Simplex Multiplexer

Duplex Multiplexer
multi port 9 or 16 channel multiplexer DVR

Saturday, February 27, 2016

Convert HDMI to RCA

Convert HDMI to RCA


Nowadays, most consumer electronic devices support the HDMI (High Definition Multimedia Interface) output for video and image downloads. Before HDMI became popular in the electronic industry, RCA connectors (yellow, white, and red cables) were primarily used to connect DVD players, video game consoles, and set top boxes to televisions or monitors. A common issue for consumers is converting their HDMI devices to RCA cable inputs in order for them to play on older television sets or monitors.
How to Convert HDMI to RCA
Step 1 – Search for an HDMI to RCA converter at a local electronics store or online. The output that the HDMI format will be converted to will determine the type of converter needed. The more complex converters will have outputs for S Video, Composite, as well as the classic RCA video and audio output cables from the device.
Step 2 – Connect the video converter to a power source (such as a wall socket or power strip).

Step 3 – Connect the HDMI cable from the device that only produces HDMI output to the HDMI input plug on the converter.
Step 4 – Connect the Red and White audio cables to the RCA audio outputs on the converter then connect to the television.
Step 5 – Connect the Yellow video cable from the video converter output to the tv’s video input.
Step 6 – Change the television channel to the one that the converter requires (normally channel 3 or 4 for televisions that do not support the “input” function) or press the “Input” button on the remote control (if supported) to view the video from the device on the television.


Friday, February 19, 2016

Compare HID 13.56MHz Credentials

Compare HID iClass Credentials - 13.56 MHz Contactless

HID iCLASS Credentials offer iCLASS 13.56 MHz contactless read/write smart card technology along with the ability to add a magnetic stripe, barcode, and anti-counterfeiting features including custom artwork or a photo identification directly on the credential.
An HID iCLASS card, keyfob, or tag can be utilized for diverse applications such as:
  • Access control
  • Network log-on security
  • Automotive vehicle identification
  • Cashless vending
  • Time and attendance
  • Biometric verification
Below, we compare the read ranges and other select features of our most popular HID iClass contactless credentials, tags, and keyfobs.


With so many variables, ordering HID iClass cards, tags and keyfobs can be a technical and confusing process. We're here to help - and we'll make it easy for you!

Presently HID develop TAG. The HID iCLASS Tag can turn a plastic ID badge into an iCLASS contactless smart card credential. Effortlessly upgrade from Prox, mag stripe or barium ferrite technology to a smart card technology with more secure access control by simply attaching the small, circular iCLASS Tag to your existing card. The iCLASS Tag will also adhere to any non-metallic device, such as a cell phone or PDA, to instantly create a contactless smart card.
iCLASS was specifically designed to make access control more powerful, more versatile, and more secure. iCLASS 13.56 MHz read/write contactless smart card technology provides versatile interoperability in applications such as access control, network log-on security, cashless vending, time and attendance, event management and biometric identification.
iCLASS technology ensures high security with mutual authentication between card and reader, encrypted data transfer, and 64-bit diversified keys for read/write capabilities. Securely separated files enable multiple applications and support future growth.
Key Features of the 206x iCLASS Tag
  • Provides the convenience of HID's iCLASS contactless read/write smart card technology in a small disk-shaped package.
  • Seamlessly upgrade from magnetic stripe, barium ferrite, or proximity technologies by adhering the Tag to an existing access card for secure access control.
  • Allows users to easily and cost-effectively turn a plastic ID badge or contact smart chip card into a contactless smart card.
  • Attaches easily to cell phones, PDAs, and other non-metallic objects.
  • More powerful, versatile and secure access control.
  • Provides versatile interoperability in applications like access control, network log-on security, cashless vending and many other areas.
Specifications:

  • Typical Maximum Read Range*R10 1.0" (2.5 cm)
    R30/RW300 1.0" (2.5 cm)
    R40/RW400 1.0" (2.5 cm)
    RK40/RWK400 1.0" - 1.5" (2.5 cm - 3.8 cm)
    *Dependent upon installation conditions.
  • DimensionsDiameter: 1.285" (3.264 cm)
    Thickness: 0.070" (0.178 cm)
  • Outer Shell MaterialLexan
  • Memory TypeEEPROM, read/write
    Multi-application Memory
    2K bit (256 Bytes) tag 
    16K bit (2K Bytes) tag 
    32K bit (4K Bytes) tag

Sunday, February 7, 2016

HD surveillance users can reduce bandwidth

HD Surveillance users can Reduce Bandwidth
When organizations are considering the switch from analogue systems to network-based HD solutions, there's often the perception that bandwidth levels will increase significantly, as will the costs associated with expanding network and storage capabilities. While these concerns do have merit, the truth is that HD video surveillance need not take up as much bandwidth and storage space as you might expect, so long as the right tools are in place.
When it comes down to managing a company’s network, IT professionals are generally cautious and strategic with how they allocate it. With only a modest percentage of the bandwidth usually reserved for video surveillance, the last thing an IT manager wants is video footage - particularly if it’s in HD - slowing down the entire network and taking up too much storage space.
The perception of high-definition video surveillance by those new to using it, is that HD surveillance takes up too much bandwidth and storage space and that you will have to pay a lot of money to expand your network and storage capacity in order to accommodate it. But HD video surveillance does not take up as much bandwidth and storage space as you might expect. Especially with technology advancing, surveillance cameras and systems are getting smarter and more adaptable to a variety of network and storage circumstances. Here are four things you can do to your HD cameras and system right away to lower bandwidth usage.


Selecting the right compression format
Getting familiar with your camera settings will allow you to maximize your image output without compromising storage space. Choose a compression format that best suits your needs. If you are looking to increase your storage, you may want to go with the h.264 compression format. Most HD video surveillance users are partial to H.264 over M-JPEG because of the way the compression works. It doesn’t capture each frame as a separate entity like M-JPEG. The video stream is composed of a reference frame, called an Index (I) Frame, and then changing areas of the image in subsequent frames, called Partial (P) Frames. The end result is a collection of I Frames and P Frames in an ordered pattern that is configurable on most cameras (for example: 1 I Frame every 30 Frames). This results in less “full" images (I Frames) and using less bandwidth and storage space without sacrificing image detail.



Use the appropriate resolution
Pick the camera that provides the least resolution that you need to get the job done. Why choose a 2 MP, when a 1 MP can do the job? Higher resolution generally means more bandwidth, which requires more storage. Obviously in a parking lot or areas where you are trying to cover a large area in high detail, a high megapixel camera is necessary. But if you are just monitoring a hallway or door, it makes sense to use an HD camera that can capture the detail you want at the lowest possible resolution.



Lower your frames per second
You are not shooting a movie, so there is no need to see 50 frames per second. Most people in the security industry use 5-7 frames per second, which in most cases, is going to show you everything you need to see evidence-wise and will be able to drop your bandwidth by a decent amount of megabits.


Recording on motion
Aside from adjusting camera settings to lower bandwidth, it is also a smart idea to configure your server to do event-based recordings. As an example, if you set up your servers to only record on motion events, then you will only capture footage whenever there is activity in the area that you are monitoring. The cameras are most likely always streaming to the server for live video, but with motion based recording they just wouldn’t be saving the data to the storage.

Saturday, January 30, 2016

Strong Access Code Recommendations

Strong Access Code Recommendations

If the site is using magnetic swipe cards or proximity cards, the code will already be programmed on the card. If the site is using individual access codes for each user, strong codes are important for the security of the site. If a user's access code is compromised, a thief can use the code to gain illicit access to the site. This can mean monetary losses to a site.

1.    Codes should be unique for each user. Even if multiple users share the same unit (such as spouses or employees of a company), each user should have their own code to identify their activity on the site. Remind your users not to share their codes with anyone and that they are responsible for all activity that occurs with their code.
2.    Codes should always be more than four digits in length to prevent them from being easily guessed. Seven to ten digits make the best codes.
3.    Codes should not proceed in numeric order. This helps prevent customers from guessing other codes. If you are pre assigning codes, count by threes or sevens to help prevent this. If you are ordering swipe cards or proximity cards, request this.
4.    Never use Social Security Numbers for codes.
5.    Good codes are random enough to prevent guessing but still easy for users to remember. Try using the unit number plus the user's telephone number. This will generally give a long enough code that will be unique to each customer but is still easy to remember. For example, a customer in unit C130 whose home phone number is (33) 2541-1513 could be assigned 3325411513 as their ten digit code.
6.    Manager codes, employee codes, and customer codes should all be different lengths. This helps prevent someone from guessing a code used by someone with a higher access level. For example, you could assign all managers eight digit codes, all employees nine digit codes, and all users ten digit codes. If you are ordering swipe cards or proximity cards, request separate number series for employees, managers, and users.
7.    If you suspect a code is being used by someone other than the assigned user or if a user reports their card lost or stolen, go into the Setup Cards function by pressing F3. Select the code from the list and edit it. In step 2 of 2, click Card was Reported Lost. Contact the user and assign them a new code. When someone tries to use this code again, it will show as Lost or Stolen on the event log.
8.    Use the Bad Attempts setting. Go to the Setup screen in StorLogix and select Setup AI Devices. Make sure the advanced options are clicked and go to step 5 of 6 and set the Bad Attempts Limit. Generally this should be set between 3 and 5. This is the number of wrong codes that can be entered before the system locks up to prevent someone from entering random codes trying to guess a good code.  

Saturday, January 9, 2016

Stop Unwanted Visitor in the School premises

School Security – Stop Unwanted Visitor in the premises

The security of any organization is the major concern, whether it be a corporate house, a manufacturing unit or schools and colleges. We have previously discussed about the security concern of the corporate houses and other work places. But through this write-up I will focus light upon the security concern of Schools and colleges. Recent happening across the globe have sent a thrill for the security of school going kids. So the safety of kids is more important for any authority. Thus, in the course of providing security for kids or students, technologically updated security system is a must.
The major components of security for schools and colleges are security cameras for video surveillance, access control of the movements of the visitors, and visitor management system for maintaining the records.

Video Surveillance: - Probably one of the most important aspect of the security of schools and colleges is a video surveillance through security cameras. The reason for this is simple, as to keep an eye at each and every corner of the campus through cameras to know what is happening on the campus ground or any classroom or in corridors. Security cameras prevent vandalism, bullying, criminal activity and sexual predators. With surveillance you will always have a record of near school property or any unwanted movements. Video surveillance will help to protect the facility from potential lawsuits as well as protect students from intruders. This whole thing is impossible if done physically.

Access Control Solution: - Another crucial and important feature that plays an important role in the security of the school premises. It does not require anyone to keep waltzing into the facility as access control lets you monitor who comes and goes. You can also do the setting in the installed access control with pin and password, which can restrict the unwanted access in the premises. It helps to reduce or stop the unauthorized movements in the arena of school. Also, you can manage the groups accordingly restricting the movement in unauthorized zones. Access Control Solution will add a deepness in the security.

Visitor Management System: - Each visitor can be managed through visitor management system, keeping his/her complete records, including the concerned person or student with whom they have to meet. As this software generates the gate pass of the visitor with his/her photograph. Until and unless all these processes are not done, the access cannot be granted to enter the premises. This helps a lot to stop the unwanted movements and entry of intruders.



The safety of school kids is the major concern for any authority or school administration. So keeping these things in mind, one should look after the security of school premises. Though this one time investment can be benefiting many lives, as nothing is precious than LIFE.

The safety of school kids is the major concern for any authority or school administration. So keeping these things in mind, one should look after the security of school premises. Though this one time investment can be benefiting many lives, as nothing is precious than LIFE.