Showing posts with label DVI-D. Show all posts
Showing posts with label DVI-D. Show all posts

Saturday, April 2, 2016

Convert DVI-D to VGA

Convert DVI-D to VGA

VGA (Video Graphics Array) is a hardware specification for display monitors and computers that allows a computer to display applications on a VGA-based monitor via a VGA cable. VGA technology is one of the oldest forms of display hardware in computing and is outfitted in virtually every computer system in the world. VGA uses analog signals but is compatible with most digital devices. While DVI technology has superseded VGA technology, both specifications are often included in personal computers, with VGA technology being much more common in laptop computers than desktop computers.
What is DVI-D?
DVI (Digital Visual Interface) is a hardware specification for computers and display equipment that is similar to VGA. DVI-D (Digital Visual Interface Digital) refers to DVI technology that is used exclusively with digital devices, while other versions of DVI can be used with analog devices. While VGA technology was made for analog computers, DVI technology is more modern and is intended for digital computers and display equipment, such as monitors and projectors. While VGA and DVI produce similar quality on regular monitors, DVI produces much higher picture quality on LCD monitors and other high-definition equipment.
How to Convert DVI-D to VGA
In order to convert DVI-D to VGA, either a DVI-D to VGA conversion cable or a DVI-D to VGA adapter must be implemented. DVI-D to VGA conversion cables and adapters are similar but the conversion cable allows the user to separate the devices over a short distance while the adapter requires the devices to be back-to-back. Most display devices have their own cable, allowing the user to connect the adapter to a DVI port and use the VGA cable to bridge the distance between the two devices. Either method allows the user to convert DVI-D digital signals into VGA analog signals so that a DVI-D source device can be used with a VGA output device.
Applications

A user may wish to convert DVI-D signals into VGA signals if he/she is using a DVI-D computer and a VGA monitor or projector. DVI-D technology is found in most modern digital equipment and should be used with a DVI-D output device, such as an LCD monitor. However, if the user’s output device is older than the source device, it may depend on analog signals and not have a DVI-D port.

Thursday, April 30, 2015

How to Setup Dual CCTV Monitors

How to Setup Dual Monitors

Using dual monitors refers to using two physical display devices to increase the viewing space running on a single computer. Microsoft Windows Operating Systems and Mac OS X now support dual and multiple monitor configurations.

Setting up dual monitors is easy. However, it requires the user to add a second video card or install a video card that can support a dual head or two separate physical outputs. The following instructions are for those with only one video card installed in their computers:-
Make sure that the computer is working fine and that it can support more than one video card. Boot in safe mode to make sure that only one video adapter and monitor is shown in Device Manager.
Next, turn off the system and install the second video card. Once installed, connect the second monitor.
If the installation is done correctly, the computer should boot the same way as always and the second monitor should still appear dark. Depending on the presence of the correct drivers bundled with the OS, drivers for the second video card may have to be installed.
Configuring Dual Monitors under Microsoft Windows
Check Device Manager. To do this, right-click My Computer then choose Properties > Hardware > Device Manager. There should be 2 monitors under the Display Adapters.

To configure the second monitor, right-click the desktop and choose Properties. Go to the Settings tab where there are two boxes, one bigger than the other. These represent the two monitors plugged into the computer. Click the second window marked “2” and change the second monitor’s resolution and color depth. Make sure that the display parameters chosen are within the monitors’ limits.

Do not forget to click the “Extend my Windows desktop into this monitor” option. If this is done properly, the 2 monitors should have the same size. Click OK and the 2nd monitor should work properly.
Troubleshooting Dual Monitor Setups
If the above instructions were followed but the second monitor is still not working, check if the operating system supports both monitors.

Also, check the kind of video card that was installed. If the computer has only one AGP slot and a PCI or ISA slot has to be used for the second video card, change the BIOS setting so that the PCI boots before the AGP display adapter.
Set up Dual Monitors Using a Splitter
In order to connect two monitors to the same computer, a VGA or DVI-D splitter can also be used, depending on the computer hardware’s specifications. A VGA splitter simply connects to a computer via a male-to-female VGA cable end. It then splits the digital signal into two parts, without compromising the quality of either part, and directs each part to its respective VGA cable end, allowing a single VGA cable to connect one computer to two separate VGA-based monitors. If a user wishes to connect more than two monitors to a computer, he/she should use a VGA splitter that uses more cable ends.
How to Display Separate Applications on Each Monitor
Although a VGA splitter connects two or more monitors to a single computer, the secondary monitor will be completely blank until the user makes the necessary changes to Windows. In order to display separate applications on each monitor:
1) Click the Start Menu and open the Control Panel.
2) Open the “Appearance and Personalization” category and select “Adjust screen resolution.”
3) Select the “Multiple Displays” menu and choose “Extend these displays.” This will activate the secondary monitor.

4) Launch the programs to be accessed and drag them to the secondary monitor. This is done by simply dragging the program window to the side of the primary monitor, causing the program to appear on the secondary monitor.