Showing posts with label DIR-825. Show all posts
Showing posts with label DIR-825. Show all posts

Saturday, October 17, 2015

D-Link Port Forwarding of DVR

D-Link Port Forwarding - DIR 615 - DIR-825 - DIR-655 - DIR-628 - DIR-628
D-Link port forwarding, also known as virtual server, allows you to configure inbound Internet connections to your router to be routed to specific devices on the network.  In order for surveillance system cameras to be accessible over the Internet, your router is configured to forward requests to your surveillance DVR or directly to IP cameras.  The IP address that your router assigns to your DVR or to IP security cameras is a LAN (internal IP address) that cannot be accessed from outside of your local network.

These instructions are for more recent D-Link routers such as the following: DIR-615, DIR-825, DIR-655, DIR-628.
1.     Open your D-Link router's control panel by going to the IP address http://192.168.0.1/ in a web browser. You will be prompt for a password.  If you did not setup a password on your router, the dlink default password is usually blank.  Enter admin for the username and leave the password blank or enter your password.
2.     After you are logged into your router

1. Click on the "Advanced" tab (#1 below). The virtual server screen will open.
2.     Click the check box next to the first open virtual server entry and fill in the Name for this service.  This can be anything that you choose.  Also fill in the IP address of the device that you are setting up port forwarding for.
3.     Enter the port # for both the Private Port and Public Port.  Ports 80, 4550, and 5550 are the ports that need to be forwarded for Some DVR webcamserver to work.  You need to make an entry for each port.  Most of our stand alone DVRs only use one port which should be supplied on the instructions for the particular DVR you are installing.
4.     Select "TCP" for Protocol.
5.     Select "Always" for Schedule, and "Allow All" for Inbound Filter.
6.     Click Save Settings.
2.     On success, the screen will display a settings saved screen

The port forwarding entry is now added.  If you need to add additional port forwarding rules, repeat the above steps.