How to Setup Dual CCTV Monitors

How to Setup Dual Monitors

Using dual monitors refers to using two physical display devices to increase the viewing space running on a single computer. Microsoft Windows Operating Systems and Mac OS X now support dual and multiple monitor configurations.

Setting up dual monitors is easy. However, it requires the user to add a second video card or install a video card that can support a dual head or two separate physical outputs. The following instructions are for those with only one video card installed in their computers:-

Make sure that the computer is working fine and that it can support more than one video card. Boot in safe mode to make sure that only one video adapter and monitor is shown in Device Manager.

Next, turn off the system and install the second video card. Once installed, connect the second monitor.

If the installation is done correctly, the computer should boot the same way as always and the second monitor should still appear dark. Depending on the presence of the correct drivers bundled with the OS, drivers for the second video card may have to be installed.

Configuring Dual Monitors under Microsoft Windows

Check Device Manager. To do this, right-click My Computer then choose Properties > Hardware > Device Manager. There should be 2 monitors under the Display Adapters.

To configure the second monitor, right-click the desktop and choose Properties. Go to the Settings tab where there are two boxes, one bigger than the other. These represent the two monitors plugged into the computer. Click the second window marked “2” and change the second monitor’s resolution and color depth. Make sure that the display parameters chosen are within the monitors’ limits.

Do not forget to click the “Extend my Windows desktop into this monitor” option. If this is done properly, the 2 monitors should have the same size. Click OK and the 2nd monitor should work properly.

Troubleshooting Dual Monitor Setups

If the above instructions were followed but the second monitor is still not working, check if the operating system supports both monitors.

Also, check the kind of video card that was installed. If the computer has only one AGP slot and a PCI or ISA slot has to be used for the second video card, change the BIOS setting so that the PCI boots before the AGP display adapter.

Set up Dual Monitors Using a Splitter

In order to connect two monitors to the same computer, a VGA or DVI-D splitter can also be used, depending on the computer hardware’s specifications. A VGA splitter simply connects to a computer via a male-to-female VGA cable end. It then splits the digital signal into two parts, without compromising the quality of either part, and directs each part to its respective VGA cable end, allowing a single VGA cable to connect one computer to two separate VGA-based monitors. If a user wishes to connect more than two monitors to a computer, he/she should use a VGA splitter that uses more cable ends.

How to Display Separate Applications on Each Monitor

Although a VGA splitter connects two or more monitors to a single computer, the secondary monitor will be completely blank until the user makes the necessary changes to Windows. In order to display separate applications on each monitor:

1) Click the Start Menu and open the Control Panel.

2) Open the “Appearance and Personalization” category and select “Adjust screen resolution.”

3) Select the “Multiple Displays” menu and choose “Extend these displays.” This will activate the secondary monitor.

4) Launch the programs to be accessed and drag them to the secondary monitor. This is done by simply dragging the program window to the side of the primary monitor, causing the program to appear on the secondary monitor.

Protect your home use Security Cameras

I want to protect my home and use Security Cameras

So I want to protect my home.   I need a video surveillance system for night or in areas with low light. So looks like the best option would be infrared security cameras that capture images even in the dark.

So what is an infrared camera exactly?

An infrared camera works by calculating the brightness of a room or particular area. They feature special LED lighting which can be seen on the outside lens. These LEDs are able to capture light from the regions of electromagnetic spectrum that allow an image to be created even if there is little visible light. For this reason we refer to IR cameras as having night vision.

An infrared security camera will switch its mode to infrared only when the light drops below a certain level. It captures black and white images at that point.

Interesting side note, IR Illuminators allow many objects to be penetrated, such as the haze, fog and smoke. Infrared Illuminators are used typically for a low light environment. Sometimes, when the IR array is focused narrowly or the hold is not strong enough the external IR Illuminator will give an extra sharp image. It can provide an additional infrared light source that is invisible to the naked eye normally.

If you are going to use infrared security cameras outdoors, the best option would be to choose those that can stand up to the natural elements as well as tampering from criminals.   I found several options that allow for the greatest flexibility including direct bright light, vandal resistant, weather proof and cost effective.