Sunday, November 5, 2017

CCTV Recording Resolution

CCTV Recording Resolution

Digital Video Recorders (DVR) and Network Video Recorders (NVR) are the heart of every security camera system. Customers often ask us about recording quality from CCTV cameras, things can seem relatively straightforward: you’ll need a DVR/NVR that can handle as many channels as you have cameras, and the more hard drive space you have for archiving all that video, the better. Naturally a customer wants to know how clear the video resolution will be from a system before making a purchase decision. Final outcome of your captured footage, 


Recording resolution is the number of pixels (dots) used to create an image. Higher resolutions use more pixels to create an image. This means that greater amounts of detail can be expressed in the image, but larger files sizes and a greater amount of storage (i.e. Hard drive space) are required to save the images or video. See the example below.

The resolution is increasing from left to right
Recording resolution is measured as the number of horizontal pixels by the number of vertical pixels (Width x Height). The following table shows some common recording resolutions.
Name
Width (Horizontal Pixels)
Height (Vertical Pixels)
Total Number of Pixels
Recommended Camera Equipment
CIF
360
240
86,400
320TVL, 400TVL, 420TVL, 480TVL,
2CIF
720
240
172,800
420TVL, 480TVL, 540TVL
VGA
640
480
307,200
540TVL, 600TVL, 1MP
D1
720
480
345,600
600TVL, 650TVL, 700TVL, 800TVL
720p
1,280
720
921,600
720p, 1.3MP
QVGA
1280
960
1228,800
960p, 1.3MP
1080p
1,920
1,080
2,073,600
1080p, 2.1MP
3MP
2048
1536
3145,728
3MP
5MP
2560
1920
4915,200
5MP
6MP
3032
2008
6088,256
6MP
8MP
3264
2448
7990,272
8MP

Notice the increase in the total number of pixels as the resolution increases. Because the total number of pixels is determined by the number of horizontal pixels times the number of vertical pixels, if both horizontal and vertical pixels are doubled, the total number of pixels increases by a factor of 4. This means that the amount of hard drive space needed to store an image or a given duration of video will also increase by a factor of 4 (given factors such as the frame rate remain equal). It is recommended to try different configurations on your system to balance image quality against the amount of storage space available.

Now based on the capabilities of your DVR you may choose to record in a certain picture resolution based on certain requirements unbeknownst to anyone but you.

I have seen a lot of misconceptions of the newly introduced 960H. Amongst the confusion, I have seen a statement along the lines of 960H provides you a 960x480 and/or 720x480 picture; as well that it improves the picture of any camera fitted with a 960H sensor via your current DVR. This is a BIG misconstrued myth. Submitted for your approval are the facts of 960H
1.   960H is NOT a megapixel resolution
2.   960H sizes are NOT 960x480 or 720 x 480 formats
3.   Cameras equipped with 960H alone, will NOT provide you with a refined captured footage of 960x480

The graphic below shows a comparison of the resolutions listed if each pixel takes up the same amount of space.


F.Y.I For all footage across every system, after video is recorded it can be magnified (zoomed in) but only digitally either through a computer or the DVR (if capable). That means, the individual pixels that create the picture can be made bigger. However, for analog footage, there will be no real advantage at detail due to the low-res of pixels.

Friday, October 20, 2017

Building Automation Protocol selecting

Building Automation Protocol selecting

Each of the competing protocols claims to be the best. So how do facility executives select the one that is best suited for the facility?

Data is communicated between devices through a Communication Protocol. It is the language that a particular device is able to interpret and forward to other devices on the network. Some common protocols are BACnet, Lon, and Modbus.

Protocols must be selected based on the needs of the facility and its ability to support a particular protocol. Each has been used many times to implement an interoperable system. Each has its advantages and disadvantages. Involve your information technology department. They generally are the controlling agency for the facility’s network infrastructure.


When selecting a control system choose one where the front end is compatible with a number of protocols. This will give greater flexibility as building equipment and devices change over time.

Why you want a BMS with open protocols
A BMS with proprietary protocols locks the system owner into using a single BMS vendor. For example, you can’t remotely change the set points of a proprietary BMS unless you use the vendor’s software.
In contrast, with open and standard BMS protocols you can shop for alternative providers of digital devices and enterprise software.

Building Automation Controls Network (BACnet): BACnet is a network protocol specifically used for multiple devices to communicate across building automation systems by system users and building system manufacturers

Modbus: Modbus is a network protocol best used for industrial automation systems specifically for connecting electronic equipment. Although Modbus is best for industrial applications, its simplicity allows it to be a useful tool for building automation as well.


LonWorks: LonWorks is a communication network protocol useful for building automation applications designed on a low bandwidth, for networking devices through power lines, fiber optics, and other media.

Protocol
BACnet
Modbus
LonWorks
Full Name
Building Automation Controls
Serial Communication Protocol
Local Operational Networks
Developed By:
ASHRAE
Modicon Inc.
Echelon Corporation/ Motorola
Use
Communication across devices
Connection between devices
Networking devices through power lines, fiber optics, and other media
Markets
Industrial, Transportation, Energy Management, Building Automation, Regulatory and health and safety
HVAC, Lighting, Life Safety, Access Controls, transportation and maintenance
Home automation, industrial, transportation, and public utility control networks.
Examples
Boiler Control, Tank Level Measurements
Tasks such as request temperature reading, send status alarm, or fan schedule
Security, lighting systems, HVAC, machine control, manufacturing, metering
Proprietary
No
No
Yes
Transmission Modes
Ethernet, IP, MS/TP, Zigbee
ASCII, RTU, TCP/IP
MS/TP, network, SNVT
Standards
ANSI/ASHRAE Standard 185 ;ISO-16484-5; ISO-16484-6
IEC 61158 
ANSI/EIA 709.1; ISO/IEC 14908-1, 14908-2, 14908-3, 14908-4
Costs
Low; No charge for usage or licensing fees
Low; No charge for usage or licensing fees
High (proprietary); Limited users (exclusive to actual members;  mostly manufacturers)
Network Interfaces
Existing LANs and LANs infrastructure
Traditional serial and Ethernet protocols
U10/U20 USB Network Interface; i.LON SmartServer; i.LON 600
Testing
BACnet Testing Labs
Modbus TCP Conformance Testing Program
Products must  conform to LonWorks protocol
Advantages
- Scalability between cost, performance and system size
- Easy connection to Modicon
- Web based tool; saves time and cost
- Endorsement and adoption by nearly every major vendor in North America and many other countries
- Suitable for small/medium volumes of data (≤255 bytes)
- Numerous developers of LonWorks products in the market
- Robust internetworking including multiple LAN types and dial-up
- Data transfer designed for industrial applications
- Less Architecture at device level
- Unrestricted growth and the ability to add new innovations and new features anytime
- Openly published and royalty-free


- Easy to deploy and maintain


- Moves raw bits or words without placing restrictions on vendors

Disadvantages
- Limited the number of field devices that can connect to a master station except Ethernet TCP/IP
- Limited the number of data types; Large binary objects are not supported.
- Outdated
- MT/TP-Wire Length
- No standard method for a node to find the description of a data object, i.e. finding a register value represents a temperature between 30 and 175.
- Controlled devices & variables are connected to a separate control device. (Not recommended due to network interruptions producing system failures)
- Ethernet-Infrastructure
- No security against unauthorized commands or interception of data
- Extensions are allowed only through the LonMark Consortium.
- New standard has security standard but not implemented in all devices
- Transmissions must be contiguous which limits the types of remote communications devices to those that can buffer data to avoid gaps in the transmission.
- Hardware specific, and requires the Neuron chip for network movement of the protocol.

- Great amount of configuration and programming required
- Close to “plug & play” ability, yet still far from achieving interconnectivity using Microsoft Windows.

- Protocol is not common in the SIMATIC family


To determine whether a BMS protocol is open, ask the vendor two simple questions:
1.     Can your competitors exchange data with your BMS?
2.     Is the system’s protocol published in such a way that it’s easily accessible to everyone (including competitors)?



Even the ASHRAE BACNet committee has convened a working group to define use of XML with BACnet systems. The group is also working to define web services that will enable data exchange between building automation and control systems and various enterprise management systems.

Use these criteria when you’re choosing devices and BMS:
1.     For devices such as RTUs and refrigeration controllers, look for ones that use open protocols such as BACnet or Modbus.
2.     Make sure these devices give you both “read” and “write” capabilities so you can change set points.
3.     For easy enterprise access, choose a BMS with web services and XML capabilities.
4.     Make sure the web services of the BMS allow both read and write capabilities.
5.     Be sure the BMS supplier provides the XML dictionary and definitions of web services to anyone, including competitors.



Sunday, October 8, 2017

Use Fiber Splice Tray in Video surveillance

Use Fiber Splice Tray


Splice trays are necessary for holding and protecting individual fusion splices or mechanical splices.
Splice trays are available for all different kinds of splices, such as mechanical splices from 3M, Corning, AMP and Siemon Company, bare fusion splices and heat-shrink fusion splices, and so on.
Normally splice trays should be matched to the type of splice used. A splice tray designed for holding mechanical splices usually cannot be used for bare fiber fusion splices or heat-shrink fusion splices. Although there are splice holding chips you can purchase to make them work, it is not the ideal way.
Standard splice trays can hold up to 12 splices and you can use several splice trays together for higher strand number fiber optic cables. The splice tray has room for mounting fiber splices and excess fibers.
Fiber loose tubes enter the splice tray at one end and are secured to the splice tray. The loose tube stops at the splice tray end and individual fibers are exposed and spliced inside the splice tray.

Optical fiber termination by fusion splicing or mechanical splicing is very common now with the increasing development of fiber optic network. As optical fibers are sensitive to pulling, bending and crushing forces, fiber splice tray is used to provide a safe routing and easy-to-manage environment for the fragile optical fiber splices. In the past, the fiber splice tray was usually installed in a box that mounted to wall. Now, you can find a lot of places in fiber optic network using fiber splice tray. This tutorial is to illustrate where the fiber splice trays are required and how to use them.
What Is Fiber Splice Tray?
Fiber splice tray is generally used to hold and protect individual fiber optic splices. There are mainly two types of fiber optic splices, one is fusion splices, the other one is mechanical splices. Fiber splice trays for fusion splices and mechanical splices are not the same. It is suggested to use specialized fiber splice trays for different fiber splices. Another important factor of fiber splice tray is the fiber count that it can hold. Most fiber splice tray can hold up to 24 fiber splices. 12-fiber splice trays are the most commonly used fiber splice tray in fiber optic network.
Where to Use Fiber Splice Tray
For most applications, fiber splice tray is not strong enough to provide robust protection for fiber splices independently, so it is usually used with other components to protect optical fibers. It has low space requirement and has great compatibility. Fiber splice trays are usually used as accessories of other devices, like fiber optic splice closure, fiber distribution box, fiber optic enclosure, etc. The following is to introduce the applications of fiber splice tray in details.

Fiber Splice Tray in Fiber Optic Splice Closure
The fiber optic splice closure is component which is widely used in today’s fiber optic network for outdoor applications and harsh environment. It usually contains one or more fiber splice tray to provide space and protection for fiber optic splices. Fiber splice trays used in different fiber optic splice closures could have different designs and fiber counts. Here take the examples of a 96-fiber horizontal fiber optic splice closure and a 24-fiber dome fiber optic splice closure.
The following picture shows the 96-fiber horizontal fiber optic splice closure. It has two input ports and two output ports providing space for 96 fiber splices. There are four standard 24-fiber splice trays stacked together inside the fiber optic splice closure.
The 24-fiber splice closure is shown in the following picture. It has five entries providing up to 24 fiber optic splices in two 12-fiber splice tray. The design of the two fiber splice tray is different from the above ones, which is suitable for the vertical design of the fiber splice closure.
Fiber Splice Tray in Fiber Distribution Box
In FTTx projects, fiber optic cables from service providers are usually required to be connected with the fiber cables deployed near end users. Fiber optic network installers usually splice the feed cable to end users by fiber optic splicing. Fiber distribution box is usually used in FTTx projects to distribute individual fibers to individual end users. Fiber splice tray is usually deployed in fiber distribution box to manage and protect fiber splices as shown in the following picture.
Fiber Splice Tray in Fiber Enclosure
Except the above mentioned two applications, fiber splice tray is also very popular in data center and server room. It is usually evitable to splice fiber optic cables with fiber pigtails in data center, which requires lower space requirement and has a better network performance compared with other fiber optic termination methods. Fiber splice tray is usually installed in fiber enclosure to provide a safe and easy-to-manage environment for fiber splices. Here takes the example of fiber splice tray used in FHD fiber enclosure as shown in the following picture. It is a 96-fiber enclosure which has four 24-fiber adapter on the front panel. This fiber enclosure can hold up four 24-fiber splice tray to provide the space for 96 fiber optic splices.
Fiber Splice Tray Solution
Fiber splice tray is a simple and easy component to provide space and protection of fiber optic splices done by fusion splicing or mechanical splicing. Be very careful when mounting the splices inside the tray. Minimum fiber bending radius requirement should always be observed.