Showing posts with label DLink 815. Show all posts
Showing posts with label DLink 815. Show all posts

Wednesday, October 6, 2010

How To Setup Two or More Routers Together

One of the most common issues people encounter is when they have more than one router hooked up. Sometimes people don't realize their modem is also a router (Such as DSL) and other times people hook up an extra router to use things their router/modem doesn't have, such as wireless.

So now with 2 or more routers hooked up people start to realize port forwarding & port triggering isn't working. This is because they are only setting up the port forwarding or triggering in one router, which is what they should be doing! Now let me explain, no one wants to setup port forwarding & triggering rules in two or more routers, they should only need to do it in one, making things simple. But you may ask "If I have more than one router how can I keep it simple?" The answer: DMZ

First off DMZ is supported by nearly every router/modem out there. What DMZ does is allow you to tell the router to forward all incoming connections to a single IP address. So in this case we will setup DMZ in the first router to point to the second router. Now all incoming connections are sent to the 2nd router and thus your port forwarding & triggering will work again.

So here is a quick example. I log into router 1 and go to the DMZ settings and put the WAN IP address of the 2nd router there. Now router 1 is out of the way for port forwarding and triggering as all incoming connections are now being forwarded to router 2. Now in router 2 I can setup my port forwarding & triggering rules just like normal.
So here is a quick step by step.
Step 1. Login into your Router
Step 2. Find the status page that shows the WAN/Internet IP address and write it down. (The Gateway IP will be the IP needed to log into the first router/modem.)
Step 3. Log into the first router/modem now.
Step 4. Find the DMZ page
Step 5. Enter the IP you wrote down into the DMZ page and enable DMZ.
Step 6. Save and you’re done.

Quick Tip: You should setup a static WAN IP address for router 2. If you leave it on DHCP the IP could change thus breaking the DMZ and of course breaking the port forwarding & triggering. This doesn't happen very often, but it is always a possibility.


If you want to Setup 3 routers at home. Here is my plan to setup. Please let me know if it make sense.
1.    SMC. It is a modern with router. It locates in the first floor, Rogers cable connected to this router. It is the main router to connect outside. I turned off the wireless on the router. It has 4 ports connected to SMC all with wires. First one connect to D-615(second router) Second one connect to D-815(third router) Third one connect to WD Mybook live(NAS HHD) Fourth one connect to TV player
2.    DLink 615. It is a wireless router. It located in the first floor as well, but close to bedroom. It has 4 ports, but I only use 3 of them connected to PC. Also there are wireless device need connect to this router as well.
3.    DLInk 815. It is a wireless router. It located in the second floor. It connected with 3 PCs and also accept wireless connection. The signal in second floor is very weak if using D-615 wireless connection.
I setup the SMC to 192.168.0.1 with DHCP, D-615 to 192.168.2.1 with DHCP and D-815 to 192.168.1.1. I cannot get rid of the second router, since SMC doesn't have enough wired port. And I need to D-815 because the signal problem. Wondering if this gonna work? Thanks.